Large cleanroom material transfer chamber with wide stainless equipment doors

인력 및 재료 오염 제거 장비

대형 클린룸 재료 전달 챔버

An oversized interlocked chamber for moving carts, equipment and large packaged materials between controlled rooms.

Oversized Transfer Volume
Wide Equipment Doors
Reinforced Cargo Floor
Configurable Airlock Sequence

견적 요청 제품 찾아보기

상품 소개

The large material transfer chamber provides a purpose-designed intermediate volume when the load exceeds a conventional pass box. Stainless internal panels and coved corners support cleaning, while the structural frame and cargo floor are selected for the actual trolley or equipment load. Door configuration, viewing panels, purge connection and floor interface can be adapted to the route through the facility.

주요 기능

Wide clear opening accommodates carts, racks and process equipment.

A reinforced cargo floor supports the specified wheel or point load.

Interlocked doors maintain room separation during a large transfer.

Coved internal corners simplify cleaning around large packaging.

Service panels allow optional purge or pressure-control connections.

고객 제품 관심사

Oversized loads need enough clearance and floor capacity while preserving the controlled boundary between rooms.

A standard pass box is too small for a trolley or equipment skid.The chamber size and door clear opening are configured around the transfer envelope.

Concentrated wheel loads deform a light cabinet floor.The cargo deck is reinforced for the specified load and wheel pattern.

Large doors are difficult to operate in a narrow corridor.Door type and opening direction can be matched to available handling space.

Large packaging sheds debris at the room boundary.Smooth interior liners, wipe-down access and optional purge support controlled preparation.

일반적인 응용 프로그램

Equipment entry to clean manufacturingLarge sterile component transferMedical-device cart movementPilot plant material logistics

기술 매개변수

Typical construction ranges for a large cleanroom material transfer chamber are listed below.

핵심 재료	Reinforced SUS 304 or SUS 316L chamber with structural frame, cargo floor and interlocked access doors
패널 두께	80-150 mm reinforced insulated wall and ceiling panels
유효 폭	1200-2500 mm clear chamber width
최대 길이	Up to 3500 mm transfer-chamber depth
강철 면면 두께	1.2-2.0 mm stainless-steel internal facing
코어 밀도	40-45 kg/m³ closed-cell PIR insulation
열전도도 (Thermal Conductivity)	0.021-0.026 W/(m·K) for the insulated chamber envelope
표면 마무리	Brushed or electropolished stainless interior with coved corners and reinforced floor plate
접합 유형	Sealed framed enclosure with large compression-gasketed interlocked doors and load-rated floor joints
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Roller or flush cargo floorSwing, slide or lift doorsViewing windows and status lightsFiltered purge connection

Planning a Large Cleanroom Material Transfer Chamber specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.