Large cleanroom material transfer chamber with wide stainless equipment doors

Peralatan Dekontaminasi Personil dan Bahan

Kamar Transfer Bahan Cleanroom Besar

An oversized interlocked chamber for moving carts, equipment and large packaged materials between controlled rooms.

Oversized Transfer Volume
Wide Equipment Doors
Reinforced Cargo Floor
Configurable Airlock Sequence

Perkenalan produk

The large material transfer chamber provides a purpose-designed intermediate volume when the load exceeds a conventional pass box. Stainless internal panels and coved corners support cleaning, while the structural frame and cargo floor are selected for the actual trolley or equipment load. Door configuration, viewing panels, purge connection and floor interface can be adapted to the route through the facility.

Fitur utama:

Wide clear opening accommodates carts, racks and process equipment.

A reinforced cargo floor supports the specified wheel or point load.

Interlocked doors maintain room separation during a large transfer.

Coved internal corners simplify cleaning around large packaging.

Service panels allow optional purge or pressure-control connections.

Kekhawatiran produk pelanggan

Oversized loads need enough clearance and floor capacity while preserving the controlled boundary between rooms.

A standard pass box is too small for a trolley or equipment skid.The chamber size and door clear opening are configured around the transfer envelope.

Concentrated wheel loads deform a light cabinet floor.The cargo deck is reinforced for the specified load and wheel pattern.

Large doors are difficult to operate in a narrow corridor.Door type and opening direction can be matched to available handling space.

Large packaging sheds debris at the room boundary.Smooth interior liners, wipe-down access and optional purge support controlled preparation.

Aplikasi yang Tipis

Equipment entry to clean manufacturingLarge sterile component transferMedical-device cart movementPilot plant material logistics

Parameter teknis

Typical construction ranges for a large cleanroom material transfer chamber are listed below.

Bahan inti	Reinforced SUS 304 or SUS 316L chamber with structural frame, cargo floor and interlocked access doors
Ketebalan Panel (Panel Thickness)	80-150 mm reinforced insulated wall and ceiling panels
Efektif lebar	1200-2500 mm clear chamber width
Panjang maksimum	Up to 3500 mm transfer-chamber depth
Baja menghadap ketebalan	1.2-2.0 mm stainless-steel internal facing
Kepadatan inti (core density)	40-45 kg/m³ closed-cell PIR insulation
Konduktivitas Termal (Thermal Conductivity)	0.021-0.026 W/(m·K) for the insulated chamber envelope
Permukaan selesai	Brushed or electropolished stainless interior with coved corners and reinforced floor plate
Jenis Bersama	Sealed framed enclosure with large compression-gasketed interlocked doors and load-rated floor joints
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Roller or flush cargo floorSwing, slide or lift doorsViewing windows and status lightsFiltered purge connection

Planning a Large Cleanroom Material Transfer Chamber specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami