Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de descontaminación de personal y material
Cámara de transferencia de material de sala limpia
An oversized interlocked chamber for moving carts, equipment and large packaged materials between controlled rooms.
- Oversized Transfer Volume
- Wide Equipment Doors
- Reinforced Cargo Floor
- Configurable Airlock Sequence
Introducción del producto
The large material transfer chamber provides a purpose-designed intermediate volume when the load exceeds a conventional pass box. Stainless internal panels and coved corners support cleaning, while the structural frame and cargo floor are selected for the actual trolley or equipment load. Door configuration, viewing panels, purge connection and floor interface can be adapted to the route through the facility.
Características clave
A reinforced cargo floor supports the specified wheel or point load.
Interlocked doors maintain room separation during a large transfer.
Coved internal corners simplify cleaning around large packaging.
Service panels allow optional purge or pressure-control connections.
Preocupaciones del producto del cliente
Oversized loads need enough clearance and floor capacity while preserving the controlled boundary between rooms.
A standard pass box is too small for a trolley or equipment skid.The chamber size and door clear opening are configured around the transfer envelope.
Concentrated wheel loads deform a light cabinet floor.The cargo deck is reinforced for the specified load and wheel pattern.
Large doors are difficult to operate in a narrow corridor.Door type and opening direction can be matched to available handling space.
Large packaging sheds debris at the room boundary.Smooth interior liners, wipe-down access and optional purge support controlled preparation.
Aplicaciones típicas
Equipment entry to clean manufacturingLarge sterile component transferMedical-device cart movementPilot plant material logistics
Parámetros técnicos
Typical construction ranges for a large cleanroom material transfer chamber are listed below.
| Materiales Core | Reinforced SUS 304 or SUS 316L chamber with structural frame, cargo floor and interlocked access doors |
|---|---|
| Panel de espesor | 80-150 mm reinforced insulated wall and ceiling panels |
| Ancho efectivo | 1200-2500 mm clear chamber width |
| Longitud máxima | Up to 3500 mm transfer-chamber depth |
| Acero frente a espesor | 1.2-2.0 mm stainless-steel internal facing |
| Densidad Core | 40-45 kg/m³ closed-cell PIR insulation |
| Conductividad térmica | 0.021-0.026 W/(m·K) for the insulated chamber envelope |
| Superficie acabada | Brushed or electropolished stainless interior with coved corners and reinforced floor plate |
| Tipo conjunto | Sealed framed enclosure with large compression-gasketed interlocked doors and load-rated floor joints |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Roller or flush cargo floorSwing, slide or lift doorsViewing windows and status lightsFiltered purge connection
Planning a Large Cleanroom Material Transfer Chamber specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
