Large cleanroom material transfer chamber with wide stainless equipment doors

Personel ve Malzeme Dekontaminasyon Ekipmanları

Büyük Temiz Oda Malzeme Transfer Odası

An oversized interlocked chamber for moving carts, equipment and large packaged materials between controlled rooms.

Oversized Transfer Volume
Wide Equipment Doors
Reinforced Cargo Floor
Configurable Airlock Sequence

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The large material transfer chamber provides a purpose-designed intermediate volume when the load exceeds a conventional pass box. Stainless internal panels and coved corners support cleaning, while the structural frame and cargo floor are selected for the actual trolley or equipment load. Door configuration, viewing panels, purge connection and floor interface can be adapted to the route through the facility.

Ana Özellikler

Wide clear opening accommodates carts, racks and process equipment.

A reinforced cargo floor supports the specified wheel or point load.

Interlocked doors maintain room separation during a large transfer.

Coved internal corners simplify cleaning around large packaging.

Service panels allow optional purge or pressure-control connections.

Müşteri Ürün Sorunları

Oversized loads need enough clearance and floor capacity while preserving the controlled boundary between rooms.

A standard pass box is too small for a trolley or equipment skid.The chamber size and door clear opening are configured around the transfer envelope.

Concentrated wheel loads deform a light cabinet floor.The cargo deck is reinforced for the specified load and wheel pattern.

Large doors are difficult to operate in a narrow corridor.Door type and opening direction can be matched to available handling space.

Large packaging sheds debris at the room boundary.Smooth interior liners, wipe-down access and optional purge support controlled preparation.

Tipik uygulamalar

Equipment entry to clean manufacturingLarge sterile component transferMedical-device cart movementPilot plant material logistics

Teknik parametreler

Typical construction ranges for a large cleanroom material transfer chamber are listed below.

Temel malzemeler	Reinforced SUS 304 or SUS 316L chamber with structural frame, cargo floor and interlocked access doors
Panel kalınlığı	80-150 mm reinforced insulated wall and ceiling panels
Effective Width (Etkili Genişlik)	1200-2500 mm clear chamber width
Maksimum uzunluk	Up to 3500 mm transfer-chamber depth
Çelik yüz yüze kalınlığı	1.2-2.0 mm stainless-steel internal facing
Core Density (Çekirdek Yoğunluğu)	40-45 kg/m³ closed-cell PIR insulation
Termal İletkenlik	0.021-0.026 W/(m·K) for the insulated chamber envelope
Yüzey bitirme	Brushed or electropolished stainless interior with coved corners and reinforced floor plate
Ortak tip	Sealed framed enclosure with large compression-gasketed interlocked doors and load-rated floor joints
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Roller or flush cargo floorSwing, slide or lift doorsViewing windows and status lightsFiltered purge connection

Planning a Large Cleanroom Material Transfer Chamber specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun