English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات تهوية وتكييف ومعالجة الهواء في الغرف النظيفة
مجفف الصناعي الدوار مزيل الرطوبة
A dual-air-stream dehumidifier that continuously adsorbs water vapor on a slowly rotating desiccant wheel and releases it into a heated reactivation airstream.
- Continuous Desiccant Rotation
- Separated Process and Reactivation Air
- Low-Temperature Moisture Removal
- Modular Service Sections
مقدمة المنتج
The industrial desiccant rotor dehumidifier divides a high-surface-area desiccant wheel between process and reactivation sectors. The process fan sends humid air through the dry portion of the rotor, while a separate heated airflow drives captured moisture out of the rotating media and discharges it outdoors. Sealed sector plates, filters and controlled rotor speed maintain a stable moisture balance even when the room temperature is too low for efficient refrigerant condensation.
الخصائص الرئيسية
Independent process and reactivation fans prevent the wet exhaust stream from re-entering the dry-air outlet.
Electric, steam or gas reactivation choices match available utilities and operating-cost priorities.
Separate access doors expose filters, rotor drive, seals and heater components without disturbing adjacent air-treatment sections.
مخاوف المنتج للعملاء
Refrigeration alone loses dehumidification capacity at low temperature and cannot economically reach many process humidity targets.
A cold production room remains humid even though the cooling coil operates continuously.Desiccant adsorption removes vapor without requiring the process air to cross a refrigerated dew-point surface.
Leakage between wet reactivation air and dry process air causes unstable outlet moisture.Adjustable sector seals and balanced fan pressures maintain physical separation across the rotating wheel.
An overloaded prefilter contaminates the rotor face and increases pressure drop.Dedicated process and reactivation filter stages are accessible from separate service doors for scheduled replacement.
A fixed reactivation heater consumes full energy during a reduced moisture load.Modulating heater output and variable rotor speed reduce regeneration input as the required dry-air condition changes.
تطبيقات نموذجية
Pharmaceutical powder processing roomsMoisture-sensitive electronics assemblyCold storage and freezer anteroomsControlled raw-material warehousesDry-air supply for laboratory equipment
المعلمات الفنية
Typical modular construction ranges for an industrial rotary desiccant dehumidifier are provided below.
| المواد الأساسية | Silica-gel or molecular-sieve composite honeycomb rotor inside a mineral-wool-insulated galvanized steel casing |
|---|---|
| سمك اللوحة | 30-50 mm double-skin insulated casing panel thickness |
| العرض الفعال | 900-2600 mm nominal process-section width |
| الحد الأقصى الطول | Up to 5500 mm overall modular unit length |
| الصلب يواجه سمك | 0.8-1.2 mm galvanized or pre-painted steel inner and outer skins |
| الكثافة الأساسية | 40-80 kg/m³ typical mineral-wool casing insulation density |
| الموصلية الحرارية | Approximately 0.036-0.045 W/(m·K) for the mineral-wool casing fill |
| إنهاء السطح | Blue powder-coated access panels with galvanized internal frame and corrosion-resistant rotor housing |
| نوع المشترك | Cam-lock or bolted modular casing with gasketed doors, flexible duct collars and sealed rotor-sector interfaces |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Electric, steam or gas-fired reactivation heaterPrecooling and aftercooling coil modulesMERV 8 through high-efficiency final filtrationVariable-speed process fan and dew-point control package
Planning a Industrial Desiccant Rotor Dehumidifier specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
