Pembekal Satu Henti Anda untuk Peralatan Bilik Bersih dan Kemudahan AseptikSokongan Projek Antarabangsa
Open mobile navigationClose mobile navigation
Laman Utama / Produk / Bilik Bersih HVAC dan Peralatan Pengendalian Udara / Industrial Desiccant Rotor Dehumidifier
Bilik Bersih HVAC dan Peralatan Pengendalian Udara

Pengeringkan Rotor Perindustrian Dehumidifier

A dual-air-stream dehumidifier that continuously adsorbs water vapor on a slowly rotating desiccant wheel and releases it into a heated reactivation airstream.
  • Continuous Desiccant Rotation
  • Separated Process and Reactivation Air
  • Low-Temperature Moisture Removal
  • Modular Service Sections
Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The industrial desiccant rotor dehumidifier divides a high-surface-area desiccant wheel between process and reactivation sectors. The process fan sends humid air through the dry portion of the rotor, while a separate heated airflow drives captured moisture out of the rotating media and discharges it outdoors. Sealed sector plates, filters and controlled rotor speed maintain a stable moisture balance even when the room temperature is too low for efficient refrigerant condensation.

Ciri-ciri Utama

A silica-gel or molecular-sieve composite wheel presents thousands of parallel channels with low airflow resistance.

Independent process and reactivation fans prevent the wet exhaust stream from re-entering the dry-air outlet.

Electric, steam or gas reactivation choices match available utilities and operating-cost priorities.

Separate access doors expose filters, rotor drive, seals and heater components without disturbing adjacent air-treatment sections.

Kebimbangan Produk Pelanggan

Refrigeration alone loses dehumidification capacity at low temperature and cannot economically reach many process humidity targets.

A cold production room remains humid even though the cooling coil operates continuously.Desiccant adsorption removes vapor without requiring the process air to cross a refrigerated dew-point surface.
Leakage between wet reactivation air and dry process air causes unstable outlet moisture.Adjustable sector seals and balanced fan pressures maintain physical separation across the rotating wheel.
An overloaded prefilter contaminates the rotor face and increases pressure drop.Dedicated process and reactivation filter stages are accessible from separate service doors for scheduled replacement.
A fixed reactivation heater consumes full energy during a reduced moisture load.Modulating heater output and variable rotor speed reduce regeneration input as the required dry-air condition changes.

Permohonan yang biasa

Pharmaceutical powder processing roomsMoisture-sensitive electronics assemblyCold storage and freezer anteroomsControlled raw-material warehousesDry-air supply for laboratory equipment

Parameter teknikal

Typical modular construction ranges for an industrial rotary desiccant dehumidifier are provided below.

Bahan TerasSilica-gel or molecular-sieve composite honeycomb rotor inside a mineral-wool-insulated galvanized steel casing
Ketebalan Panel30-50 mm double-skin insulated casing panel thickness
Lebar berkesan900-2600 mm nominal process-section width
Panjang maksimumUp to 5500 mm overall modular unit length
Keluli Menghadapi Ketebalan0.8-1.2 mm galvanized or pre-painted steel inner and outer skins
Ketumpatan teras40-80 kg/m³ typical mineral-wool casing insulation density
Kekonduksian TermaApproximately 0.036-0.045 W/(m·K) for the mineral-wool casing fill
Kemasan permukaanBlue powder-coated access panels with galvanized internal frame and corrosion-resistant rotor housing
Jenis BersatuCam-lock or bolted modular casing with gasketed doors, flexible duct collars and sealed rotor-sector interfaces
PenyesuaianBoleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Electric, steam or gas-fired reactivation heaterPrecooling and aftercooling coil modulesMERV 8 through high-efficiency final filtrationVariable-speed process fan and dew-point control package

Planning a Industrial Desiccant Rotor Dehumidifier specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami
Email Kami WhatsApp WeChat

Laman Utama

Produk

Berita

Tentang Kami

Hubungi Kami