Desiccant Rotor Dehumidifier Industri
- Continuous Desiccant Rotation
- Separated Process and Reactivation Air
- Low-Temperature Moisture Removal
- Modular Service Sections
Perkenalan produk
The industrial desiccant rotor dehumidifier divides a high-surface-area desiccant wheel between process and reactivation sectors. The process fan sends humid air through the dry portion of the rotor, while a separate heated airflow drives captured moisture out of the rotating media and discharges it outdoors. Sealed sector plates, filters and controlled rotor speed maintain a stable moisture balance even when the room temperature is too low for efficient refrigerant condensation.
Fitur utama:
Independent process and reactivation fans prevent the wet exhaust stream from re-entering the dry-air outlet.
Electric, steam or gas reactivation choices match available utilities and operating-cost priorities.
Separate access doors expose filters, rotor drive, seals and heater components without disturbing adjacent air-treatment sections.
Kekhawatiran produk pelanggan
Refrigeration alone loses dehumidification capacity at low temperature and cannot economically reach many process humidity targets.
Aplikasi yang Tipis
Parameter teknis
Typical modular construction ranges for an industrial rotary desiccant dehumidifier are provided below.
| Bahan inti | Silica-gel or molecular-sieve composite honeycomb rotor inside a mineral-wool-insulated galvanized steel casing |
|---|---|
| Ketebalan Panel (Panel Thickness) | 30-50 mm double-skin insulated casing panel thickness |
| Efektif lebar | 900-2600 mm nominal process-section width |
| Panjang maksimum | Up to 5500 mm overall modular unit length |
| Baja menghadap ketebalan | 0.8-1.2 mm galvanized or pre-painted steel inner and outer skins |
| Kepadatan inti (core density) | 40-80 kg/m³ typical mineral-wool casing insulation density |
| Konduktivitas Termal (Thermal Conductivity) | Approximately 0.036-0.045 W/(m·K) for the mineral-wool casing fill |
| Permukaan selesai | Blue powder-coated access panels with galvanized internal frame and corrosion-resistant rotor housing |
| Jenis Bersama | Cam-lock or bolted modular casing with gasketed doors, flexible duct collars and sealed rotor-sector interfaces |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
Planning a Industrial Desiccant Rotor Dehumidifier specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam