Industrial desiccant rotor dehumidifier with blue modular service doors

ОВК и оборудование для обработки воздуха в чистых помещениях

Промышленный осушивающий роторный осушиватель

A dual-air-stream dehumidifier that continuously adsorbs water vapor on a slowly rotating desiccant wheel and releases it into a heated reactivation airstream.

Continuous Desiccant Rotation
Separated Process and Reactivation Air
Low-Temperature Moisture Removal
Modular Service Sections

Запрос котировки Просмотреть продукты

Введение продукции

The industrial desiccant rotor dehumidifier divides a high-surface-area desiccant wheel between process and reactivation sectors. The process fan sends humid air through the dry portion of the rotor, while a separate heated airflow drives captured moisture out of the rotating media and discharges it outdoors. Sealed sector plates, filters and controlled rotor speed maintain a stable moisture balance even when the room temperature is too low for efficient refrigerant condensation.

Основные характеристики

A silica-gel or molecular-sieve composite wheel presents thousands of parallel channels with low airflow resistance.

Independent process and reactivation fans prevent the wet exhaust stream from re-entering the dry-air outlet.

Electric, steam or gas reactivation choices match available utilities and operating-cost priorities.

Separate access doors expose filters, rotor drive, seals and heater components without disturbing adjacent air-treatment sections.

Обеспокоенность клиентов продуктами

Refrigeration alone loses dehumidification capacity at low temperature and cannot economically reach many process humidity targets.

A cold production room remains humid even though the cooling coil operates continuously.Desiccant adsorption removes vapor without requiring the process air to cross a refrigerated dew-point surface.

Leakage between wet reactivation air and dry process air causes unstable outlet moisture.Adjustable sector seals and balanced fan pressures maintain physical separation across the rotating wheel.

An overloaded prefilter contaminates the rotor face and increases pressure drop.Dedicated process and reactivation filter stages are accessible from separate service doors for scheduled replacement.

A fixed reactivation heater consumes full energy during a reduced moisture load.Modulating heater output and variable rotor speed reduce regeneration input as the required dry-air condition changes.

Типичные приложения

Pharmaceutical powder processing roomsMoisture-sensitive electronics assemblyCold storage and freezer anteroomsControlled raw-material warehousesDry-air supply for laboratory equipment

Технические параметры

Typical modular construction ranges for an industrial rotary desiccant dehumidifier are provided below.

Основной материал	Silica-gel or molecular-sieve composite honeycomb rotor inside a mineral-wool-insulated galvanized steel casing
Толщина панели	30-50 mm double-skin insulated casing panel thickness
эффективная ширина	900-2600 mm nominal process-section width
Максимальная длина	Up to 5500 mm overall modular unit length
Толщина линий стали	0.8-1.2 mm galvanized or pre-painted steel inner and outer skins
Плотность ядра	40-80 kg/m³ typical mineral-wool casing insulation density
Теплопроводимость	Approximately 0.036-0.045 W/(m·K) for the mineral-wool casing fill
Поверхностная отделка	Blue powder-coated access panels with galvanized internal frame and corrosion-resistant rotor housing
Объединенный тип	Cam-lock or bolted modular casing with gasketed doors, flexible duct collars and sealed rotor-sector interfaces
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Electric, steam or gas-fired reactivation heaterPrecooling and aftercooling coil modulesMERV 8 through high-efficiency final filtrationVariable-speed process fan and dew-point control package

Planning a Industrial Desiccant Rotor Dehumidifier specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой