English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة الجدار والسقف للغرفة النظيفة
خارجي 90 درجة زاوية غرف الأبحاث الملف الشخصي
A crisp L-shaped aluminum trim that encloses and protects the exposed edges of a square external cleanroom wall corner.
- Crisp external 90-degree finish
- Protects two exposed panel edges
- Low-profile square appearance
- Anodized or powder-coated aluminum
مقدمة المنتج
The External 90-Degree Cleanroom Corner Profile finishes a projecting square corner without adding a large radius. Two legs bridge the adjacent wall faces, covering vulnerable panel edges and creating straight sealant boundaries. The profile is suited to architectural layouts that require a compact, crisp corner line and is distinct from the rounded external coving profile used for soft-edge protection.
الخصائص الرئيسية
Both panel edges are enclosed beneath a durable aluminum trim.
The low-profile legs preserve a clean architectural appearance.
Concealed attachment methods minimize visible hardware on adjacent faces.
Continuous profile edges guide neat sealing along both sides of the corner.
مخاوف المنتج للعملاء
Square outside corners expose two panel edges to view and impact, making alignment and edge protection especially important.
Bare panel edges at a projecting corner can dent or delaminate after minor contact.The aluminum angle spreads contact across both faces and covers the vulnerable edges.
Unequal panel cuts produce a visibly crooked external corner line.Straight profile legs establish a crisp reference edge over the underlying joint.
Large-radius guards change the intended square architectural geometry.The compact 90-degree section preserves a sharp, low-profile corner appearance.
Sealant applied directly over an open panel junction can crack or look irregular.The profile creates stable, narrow interfaces for sealant on both adjoining faces.
تطبيقات نموذجية
Square external cleanroom partitionsDoor and window return cornersModular enclosure outside edgesLaboratory wall projectionsArchitectural panel corner finishing
المعلمات الفنية
This product is the square external angle in the profile range. It should not be confused with the separate convex external corner cover designed around a rounded radius.
| المواد الأساسية | 6063-T5 extruded aluminum external angle profile |
|---|---|
| سمك اللوحة | 50, 75 or 100 mm compatible wall systems |
| العرض الفعال | N/A — selected by the required external corner leg dimensions |
| الحد الأقصى الطول | 6000 mm |
| الصلب يواجه سمك | N/A — not applicable to an aluminum external angle |
| الكثافة الأساسية | N/A — no insulated core; aluminum alloy density is approximately 2700 kg/m³ |
| الموصلية الحرارية | N/A — no insulated core; aluminum alloy is approximately 200 W/(m·K) |
| إنهاء السطح | Clear anodized or smooth polyester powder-coated |
| نوع المشترك | External two-leg 90-degree cover with concealed fixing and sealed perimeter edges |
| التخصيص | متاح بناءً على التطبيق المقصود وبيئة التشغيل |
الخيارات المتاحة
External angle for 50 mm panelsExternal angle for 75 mm panelsExternal angle for 100 mm panelsClear anodized or white powder-coated finish
Planning a External 90-Degree Cleanroom Corner Profile specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
