Cleanroom mur et systèmes de plafond

Profil de coin de salle blanche externe à 90 degrés

A crisp L-shaped aluminum trim that encloses and protects the exposed edges of a square external cleanroom wall corner.

Crisp external 90-degree finish
Protects two exposed panel edges
Low-profile square appearance
Anodized or powder-coated aluminum

Introduction de produit

The External 90-Degree Cleanroom Corner Profile finishes a projecting square corner without adding a large radius. Two legs bridge the adjacent wall faces, covering vulnerable panel edges and creating straight sealant boundaries. The profile is suited to architectural layouts that require a compact, crisp corner line and is distinct from the rounded external coving profile used for soft-edge protection.

Key Features

A precise L-shaped section produces a straight square outside corner.

Both panel edges are enclosed beneath a durable aluminum trim.

The low-profile legs preserve a clean architectural appearance.

Concealed attachment methods minimize visible hardware on adjacent faces.

Continuous profile edges guide neat sealing along both sides of the corner.

Préoccupations du client produit

Square outside corners expose two panel edges to view and impact, making alignment and edge protection especially important.

Bare panel edges at a projecting corner can dent or delaminate after minor contact.The aluminum angle spreads contact across both faces and covers the vulnerable edges.

Unequal panel cuts produce a visibly crooked external corner line.Straight profile legs establish a crisp reference edge over the underlying joint.

Large-radius guards change the intended square architectural geometry.The compact 90-degree section preserves a sharp, low-profile corner appearance.

Sealant applied directly over an open panel junction can crack or look irregular.The profile creates stable, narrow interfaces for sealant on both adjoining faces.

Les applications typiques

Square external cleanroom partitionsDoor and window return cornersModular enclosure outside edgesLaboratory wall projectionsArchitectural panel corner finishing

Paramètres techniques

This product is the square external angle in the profile range. It should not be confused with the separate convex external corner cover designed around a rounded radius.

Matériaux de base	6063-T5 extruded aluminum external angle profile
Panneau épaisseur	50, 75 or 100 mm compatible wall systems
Largeur effective	N/A — selected by the required external corner leg dimensions
Longueur maximale	6000 mm
Acier face épaisseur	N/A — not applicable to an aluminum external angle
Densité Core	N / A - pas de noyau isolé ; densité d'alliage d'aluminium d'environ 2700 kg / m3
Conductivité thermique	N / A - aucun noyau isolé ; alliage d'aluminium est d'environ 200 W / (m · K)
surface finie	Clear anodized or smooth polyester powder-coated
Type joint	External two-leg 90-degree cover with concealed fixing and sealed perimeter edges
Customisation	Disponible en fonction de l'application prévue et de l'environnement d'exploitation

Options disponibles

External angle for 50 mm panelsExternal angle for 75 mm panelsExternal angle for 100 mm panelsClear anodized or white powder-coated finish

Planning a External 90-Degree Cleanroom Corner Profile specification?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe