Sistem Dinding dan Langit-langit Cleanroom

Profil Sudut Cleanroom Eksternal 90 Derajat

A crisp L-shaped aluminum trim that encloses and protects the exposed edges of a square external cleanroom wall corner.

Crisp external 90-degree finish
Protects two exposed panel edges
Low-profile square appearance
Anodized or powder-coated aluminum

Perkenalan produk

The External 90-Degree Cleanroom Corner Profile finishes a projecting square corner without adding a large radius. Two legs bridge the adjacent wall faces, covering vulnerable panel edges and creating straight sealant boundaries. The profile is suited to architectural layouts that require a compact, crisp corner line and is distinct from the rounded external coving profile used for soft-edge protection.

Fitur utama:

A precise L-shaped section produces a straight square outside corner.

Both panel edges are enclosed beneath a durable aluminum trim.

The low-profile legs preserve a clean architectural appearance.

Concealed attachment methods minimize visible hardware on adjacent faces.

Continuous profile edges guide neat sealing along both sides of the corner.

Kekhawatiran produk pelanggan

Square outside corners expose two panel edges to view and impact, making alignment and edge protection especially important.

Bare panel edges at a projecting corner can dent or delaminate after minor contact.The aluminum angle spreads contact across both faces and covers the vulnerable edges.

Unequal panel cuts produce a visibly crooked external corner line.Straight profile legs establish a crisp reference edge over the underlying joint.

Large-radius guards change the intended square architectural geometry.The compact 90-degree section preserves a sharp, low-profile corner appearance.

Sealant applied directly over an open panel junction can crack or look irregular.The profile creates stable, narrow interfaces for sealant on both adjoining faces.

Aplikasi yang Tipis

Square external cleanroom partitionsDoor and window return cornersModular enclosure outside edgesLaboratory wall projectionsArchitectural panel corner finishing

Parameter teknis

This product is the square external angle in the profile range. It should not be confused with the separate convex external corner cover designed around a rounded radius.

Bahan inti	6063-T5 extruded aluminum external angle profile
Ketebalan Panel (Panel Thickness)	50, 75 or 100 mm compatible wall systems
Efektif lebar	N/A — selected by the required external corner leg dimensions
Panjang maksimum	6000 mm ZXQ000003
Baja menghadap ketebalan	N/A — not applicable to an aluminum external angle
Kepadatan inti (core density)	N/A — no insulated core; aluminum alloy density is approximately 2700 kg/m³
Konduktivitas Termal (Thermal Conductivity)	N/A — no insulated core; aluminum alloy is approximately 200 W/(m·K)
Permukaan selesai	Clear anodized or smooth polyester powder-coated
Jenis Bersama	External two-leg 90-degree cover with concealed fixing and sealed perimeter edges
Customization (Kustomisasi)	A Tersedia berdasarkan aplikasi dan lingkungan operasi yang dimaksudkan

Pilihan yang tersedia

External angle for 50 mm panelsExternal angle for 75 mm panelsExternal angle for 100 mm panelsClear anodized or white powder-coated finish

Planning a External 90-Degree Cleanroom Corner Profile specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami