クリーンルームの壁と天井システム

外部 90 度のクリーンルームのコーナープロファイル

A crisp L-shaped aluminum trim that encloses and protects the exposed edges of a square external cleanroom wall corner.

Crisp external 90-degree finish
Protects two exposed panel edges
Low-profile square appearance
Anodized or powder-coated aluminum

商品紹介

The External 90-Degree Cleanroom Corner Profile finishes a projecting square corner without adding a large radius. Two legs bridge the adjacent wall faces, covering vulnerable panel edges and creating straight sealant boundaries. The profile is suited to architectural layouts that require a compact, crisp corner line and is distinct from the rounded external coving profile used for soft-edge protection.

主要な特徴

A precise L-shaped section produces a straight square outside corner.

Both panel edges are enclosed beneath a durable aluminum trim.

The low-profile legs preserve a clean architectural appearance.

Concealed attachment methods minimize visible hardware on adjacent faces.

Continuous profile edges guide neat sealing along both sides of the corner.

お客様の製品に関する懸念事項

Square outside corners expose two panel edges to view and impact, making alignment and edge protection especially important.

Bare panel edges at a projecting corner can dent or delaminate after minor contact.The aluminum angle spreads contact across both faces and covers the vulnerable edges.

Unequal panel cuts produce a visibly crooked external corner line.Straight profile legs establish a crisp reference edge over the underlying joint.

Large-radius guards change the intended square architectural geometry.The compact 90-degree section preserves a sharp, low-profile corner appearance.

Sealant applied directly over an open panel junction can crack or look irregular.The profile creates stable, narrow interfaces for sealant on both adjoining faces.

典型的な用途

Square external cleanroom partitionsDoor and window return cornersModular enclosure outside edgesLaboratory wall projectionsArchitectural panel corner finishing

技術的なパラメータ

This product is the square external angle in the profile range. It should not be confused with the separate convex external corner cover designed around a rounded radius.

コア材料	6063-T5 extruded aluminum external angle profile
パネルの厚さ	50, 75 or 100 mm compatible wall systems
有効幅	N/A — selected by the required external corner leg dimensions
最大長さ	6000 mm
鋼鉄の厚さを直面する	N/A — not applicable to an aluminum external angle
コア密度	N / A— 絶縁コアなし、アルミニウム合金密度は約 2700 kg / m3 です。
熱伝導率	N / A— 絶縁コアなし；アルミニウム合金は約 200 W / （ m · K ）
表面仕上げ	Clear anodized or smooth polyester powder-coated
ジョイントタイプ	External two-leg 90-degree cover with concealed fixing and sealed perimeter edges
カスタマイズ	目的のアプリケーションおよび動作環境に基づいて利用可能

利用可能なオプション

External angle for 50 mm panelsExternal angle for 75 mm panelsExternal angle for 100 mm panelsClear anodized or white powder-coated finish

Planning a External 90-Degree Cleanroom Corner Profile specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する