Стенные и потолочные системы для чистых комнат

Внешний 90-градусный угловой профиль чистого помещения

A crisp L-shaped aluminum trim that encloses and protects the exposed edges of a square external cleanroom wall corner.

Crisp external 90-degree finish
Protects two exposed panel edges
Low-profile square appearance
Anodized or powder-coated aluminum

Введение продукции

The External 90-Degree Cleanroom Corner Profile finishes a projecting square corner without adding a large radius. Two legs bridge the adjacent wall faces, covering vulnerable panel edges and creating straight sealant boundaries. The profile is suited to architectural layouts that require a compact, crisp corner line and is distinct from the rounded external coving profile used for soft-edge protection.

Основные характеристики

A precise L-shaped section produces a straight square outside corner.

Both panel edges are enclosed beneath a durable aluminum trim.

The low-profile legs preserve a clean architectural appearance.

Concealed attachment methods minimize visible hardware on adjacent faces.

Continuous profile edges guide neat sealing along both sides of the corner.

Обеспокоенность клиентов продуктами

Square outside corners expose two panel edges to view and impact, making alignment and edge protection especially important.

Bare panel edges at a projecting corner can dent or delaminate after minor contact.The aluminum angle spreads contact across both faces and covers the vulnerable edges.

Unequal panel cuts produce a visibly crooked external corner line.Straight profile legs establish a crisp reference edge over the underlying joint.

Large-radius guards change the intended square architectural geometry.The compact 90-degree section preserves a sharp, low-profile corner appearance.

Sealant applied directly over an open panel junction can crack or look irregular.The profile creates stable, narrow interfaces for sealant on both adjoining faces.

Типичные приложения

Square external cleanroom partitionsDoor and window return cornersModular enclosure outside edgesLaboratory wall projectionsArchitectural panel corner finishing

Технические параметры

This product is the square external angle in the profile range. It should not be confused with the separate convex external corner cover designed around a rounded radius.

Основной материал	6063-T5 extruded aluminum external angle profile
Толщина панели	50, 75 or 100 mm compatible wall systems
эффективная ширина	N/A — selected by the required external corner leg dimensions
Максимальная длина	6000 mm
Толщина линий стали	N/A — not applicable to an aluminum external angle
Плотность ядра	N/A — no insulated core; aluminum alloy density is approximately 2700 kg/m³
Теплопроводимость	N/A — no insulated core; aluminum alloy is approximately 200 W/(m·K)
Поверхностная отделка	Clear anodized or smooth polyester powder-coated
Объединенный тип	External two-leg 90-degree cover with concealed fixing and sealed perimeter edges
Customization	Доступно в зависимости от предполагаемого приложения и операционной среды

Доступные варианты

External angle for 50 mm panelsExternal angle for 75 mm panelsExternal angle for 100 mm panelsClear anodized or white powder-coated finish

Planning a External 90-Degree Cleanroom Corner Profile specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой