클린룸 벽 및 천장 시스템

외부 90 도 클린룸 모서리 프로파일

A crisp L-shaped aluminum trim that encloses and protects the exposed edges of a square external cleanroom wall corner.

Crisp external 90-degree finish
Protects two exposed panel edges
Low-profile square appearance
Anodized or powder-coated aluminum

견적 요청 제품 찾아보기

상품 소개

The External 90-Degree Cleanroom Corner Profile finishes a projecting square corner without adding a large radius. Two legs bridge the adjacent wall faces, covering vulnerable panel edges and creating straight sealant boundaries. The profile is suited to architectural layouts that require a compact, crisp corner line and is distinct from the rounded external coving profile used for soft-edge protection.

주요 기능

A precise L-shaped section produces a straight square outside corner.

Both panel edges are enclosed beneath a durable aluminum trim.

The low-profile legs preserve a clean architectural appearance.

Concealed attachment methods minimize visible hardware on adjacent faces.

Continuous profile edges guide neat sealing along both sides of the corner.

고객 제품 관심사

Square outside corners expose two panel edges to view and impact, making alignment and edge protection especially important.

Bare panel edges at a projecting corner can dent or delaminate after minor contact.The aluminum angle spreads contact across both faces and covers the vulnerable edges.

Unequal panel cuts produce a visibly crooked external corner line.Straight profile legs establish a crisp reference edge over the underlying joint.

Large-radius guards change the intended square architectural geometry.The compact 90-degree section preserves a sharp, low-profile corner appearance.

Sealant applied directly over an open panel junction can crack or look irregular.The profile creates stable, narrow interfaces for sealant on both adjoining faces.

일반적인 응용 프로그램

Square external cleanroom partitionsDoor and window return cornersModular enclosure outside edgesLaboratory wall projectionsArchitectural panel corner finishing

기술 매개변수

This product is the square external angle in the profile range. It should not be confused with the separate convex external corner cover designed around a rounded radius.

핵심 재료	6063-T5 extruded aluminum external angle profile
패널 두께	50, 75 or 100 mm compatible wall systems
유효 폭	N/A — selected by the required external corner leg dimensions
최대 길이	6000 mm
강철 면면 두께	N/A — not applicable to an aluminum external angle
코어 밀도	N / A - 단열 코어 없음; 알루미늄 합금 밀도는 약 2700 kg / m 3 입니다.
열전도도 (Thermal Conductivity)	N / A - 단열 코어 없음; 알루미늄 합금 약 200 W / (m · K)
표면 마무리	Clear anodized or smooth polyester powder-coated
접합 유형	External two-leg 90-degree cover with concealed fixing and sealed perimeter edges
사용자 정의	사용 대상 어플리케이션 및 운영 환경에 따라 사용 가능

사용 가능한 옵션

External angle for 50 mm panelsExternal angle for 75 mm panelsExternal angle for 100 mm panelsClear anodized or white powder-coated finish

Planning a External 90-Degree Cleanroom Corner Profile specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.