Evaporative media humidifier with blue-green wetted cassettes

معدات تهوية وتكييف ومعالجة الهواء في الغرف النظيفة

E المرطب وسائل الإعلام البخارية

A high-capacity in-duct humidifier that passes air through uniformly wetted corrugated media for low-energy moisture addition and evaporative cooling.

Uniform Wetted Media
High-Capacity Adiabatic Output
Low Electrical Demand
Accessible Cassette and Sump

طلب عرض أسعار تصفح المنتجات

مقدمة المنتج

Water is distributed along the top of corrugated media cassettes and flows downward over a large structured surface. Unsaturated air passes through the wetted channels and evaporates part of the water, increasing humidity while reducing dry-bulb temperature. Excess water drains to a stainless sump for recirculation or single-pass discharge, and a downstream separator captures entrained droplets.

الخصائص الرئيسية

Deep corrugated media provides a large evaporation surface without high-pressure pumps or steam generation.

A full-width distribution header wets each cassette evenly and minimizes dry bypass strips.

The stainless sump, pump and drain connections are exposed below the media for cleaning.

Individual cassettes slide out of the support frame for inspection or replacement.

مخاوف المنتج للعملاء

Wetted-media systems need even water distribution, hygienic drainage and adequate face area to avoid dry zones or droplet carryover.

Uneven water distribution leaves dry media and unstable output.A balanced top header feeds each full-height cassette across the complete face.

Standing sump water accumulates solids and microbial growth.Smooth stainless surfaces, controlled bleed, periodic drain and accessible cleaning limit stagnation.

Excess face velocity carries water into downstream ductwork.Correct module area and a dedicated droplet separator retain entrained moisture.

Scaling blocks media channels and raises pressure drop.Water-quality control, bleed rate and removable cassettes support planned cleaning or replacement.

تطبيقات نموذجية

Large cleanroom make-up air unitsData-center evaporative coolingPharmaceutical ventilation systemsIndustrial process-air humidificationLow-energy laboratory air handlers

المعلمات الفنية

Typical construction ranges for an in-duct recirculating evaporative media module are shown below.

المواد الأساسية	Inorganic glass-fiber or cellulose evaporative media in stainless steel cassette frame
سمك اللوحة	1.2-2.0 mm stainless module and sump panel thickness
العرض الفعال	500-4000 mm active media face width
الحد الأقصى الطول	Up to 5000 mm overall multi-cassette module length
الصلب يواجه سمك	1.2-2.0 mm 304 stainless frame and sump
الكثافة الأساسية	35-80 kg/m³ typical structured evaporative-media density
الموصلية الحرارية	Approximately 0.04-0.08 W/(m·K) for dry structured media
إنهاء السطح	Passivated stainless frame with blue-green impregnated corrugated media
نوع المشترك	Bolted flanged module with slide-out media cassettes, welded sump and union-connected header
التخصيص	متوفر على أساس التطبيق المقصود وبيئة التشغيل.

الخيارات المتاحة

Recirculating or direct-water configurationGlass-fiber or treated cellulose mediaStainless droplet separator and conductivity controlSingle or multiple cassette banks with access section

Planning a Evaporative Media Humidifier specification?

أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.

تحدث مع فريقنا