Evaporative media humidifier with blue-green wetted cassettes

ОВК и оборудование для обработки воздуха в чистых помещениях

Увлажнитель испарительных сред

A high-capacity in-duct humidifier that passes air through uniformly wetted corrugated media for low-energy moisture addition and evaporative cooling.

Uniform Wetted Media
High-Capacity Adiabatic Output
Low Electrical Demand
Accessible Cassette and Sump

Запрос котировки Просмотреть продукты

Введение продукции

Water is distributed along the top of corrugated media cassettes and flows downward over a large structured surface. Unsaturated air passes through the wetted channels and evaporates part of the water, increasing humidity while reducing dry-bulb temperature. Excess water drains to a stainless sump for recirculation or single-pass discharge, and a downstream separator captures entrained droplets.

Основные характеристики

Deep corrugated media provides a large evaporation surface without high-pressure pumps or steam generation.

A full-width distribution header wets each cassette evenly and minimizes dry bypass strips.

The stainless sump, pump and drain connections are exposed below the media for cleaning.

Individual cassettes slide out of the support frame for inspection or replacement.

Обеспокоенность клиентов продуктами

Wetted-media systems need even water distribution, hygienic drainage and adequate face area to avoid dry zones or droplet carryover.

Uneven water distribution leaves dry media and unstable output.A balanced top header feeds each full-height cassette across the complete face.

Standing sump water accumulates solids and microbial growth.Smooth stainless surfaces, controlled bleed, periodic drain and accessible cleaning limit stagnation.

Excess face velocity carries water into downstream ductwork.Correct module area and a dedicated droplet separator retain entrained moisture.

Scaling blocks media channels and raises pressure drop.Water-quality control, bleed rate and removable cassettes support planned cleaning or replacement.

Типичные приложения

Large cleanroom make-up air unitsData-center evaporative coolingPharmaceutical ventilation systemsIndustrial process-air humidificationLow-energy laboratory air handlers

Технические параметры

Typical construction ranges for an in-duct recirculating evaporative media module are shown below.

Основной материал	Inorganic glass-fiber or cellulose evaporative media in stainless steel cassette frame
Толщина панели	1.2-2.0 mm stainless module and sump panel thickness
эффективная ширина	500-4000 mm active media face width
Максимальная длина	Up to 5000 mm overall multi-cassette module length
Толщина линий стали	1.2-2.0 mm 304 stainless frame and sump
Плотность ядра	35-80 kg/m³ typical structured evaporative-media density
Теплопроводимость	Approximately 0.04-0.08 W/(m·K) for dry structured media
Поверхностная отделка	Passivated stainless frame with blue-green impregnated corrugated media
Объединенный тип	Bolted flanged module with slide-out media cassettes, welded sump and union-connected header
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Recirculating or direct-water configurationGlass-fiber or treated cellulose mediaStainless droplet separator and conductivity controlSingle or multiple cassette banks with access section

Planning a Evaporative Media Humidifier specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой