Evaporative media humidifier with blue-green wetted cassettes

클린룸 HVAC 및 공기 처리 장비

증발 미디어 가습기

A high-capacity in-duct humidifier that passes air through uniformly wetted corrugated media for low-energy moisture addition and evaporative cooling.

Uniform Wetted Media
High-Capacity Adiabatic Output
Low Electrical Demand
Accessible Cassette and Sump

견적 요청 제품 찾아보기

상품 소개

Water is distributed along the top of corrugated media cassettes and flows downward over a large structured surface. Unsaturated air passes through the wetted channels and evaporates part of the water, increasing humidity while reducing dry-bulb temperature. Excess water drains to a stainless sump for recirculation or single-pass discharge, and a downstream separator captures entrained droplets.

주요 기능

Deep corrugated media provides a large evaporation surface without high-pressure pumps or steam generation.

A full-width distribution header wets each cassette evenly and minimizes dry bypass strips.

The stainless sump, pump and drain connections are exposed below the media for cleaning.

Individual cassettes slide out of the support frame for inspection or replacement.

고객 제품 관심사

Wetted-media systems need even water distribution, hygienic drainage and adequate face area to avoid dry zones or droplet carryover.

Uneven water distribution leaves dry media and unstable output.A balanced top header feeds each full-height cassette across the complete face.

Standing sump water accumulates solids and microbial growth.Smooth stainless surfaces, controlled bleed, periodic drain and accessible cleaning limit stagnation.

Excess face velocity carries water into downstream ductwork.Correct module area and a dedicated droplet separator retain entrained moisture.

Scaling blocks media channels and raises pressure drop.Water-quality control, bleed rate and removable cassettes support planned cleaning or replacement.

일반적인 응용 프로그램

Large cleanroom make-up air unitsData-center evaporative coolingPharmaceutical ventilation systemsIndustrial process-air humidificationLow-energy laboratory air handlers

기술 매개변수

Typical construction ranges for an in-duct recirculating evaporative media module are shown below.

핵심 재료	Inorganic glass-fiber or cellulose evaporative media in stainless steel cassette frame
패널 두께	1.2-2.0 mm stainless module and sump panel thickness
유효 폭	500-4000 mm active media face width
최대 길이	Up to 5000 mm overall multi-cassette module length
강철 면면 두께	1.2-2.0 mm 304 stainless frame and sump
코어 밀도	35-80 kg/m³ typical structured evaporative-media density
열전도도 (Thermal Conductivity)	Approximately 0.04-0.08 W/(m·K) for dry structured media
표면 마무리	Passivated stainless frame with blue-green impregnated corrugated media
접합 유형	Bolted flanged module with slide-out media cassettes, welded sump and union-connected header
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Recirculating or direct-water configurationGlass-fiber or treated cellulose mediaStainless droplet separator and conductivity controlSingle or multiple cassette banks with access section

Planning a Evaporative Media Humidifier specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.