Evaporative media humidifier with blue-green wetted cassettes

クリーンルーム HVAC および空気処理装置

E 蒸気媒体の加湿器

A high-capacity in-duct humidifier that passes air through uniformly wetted corrugated media for low-energy moisture addition and evaporative cooling.

Uniform Wetted Media
High-Capacity Adiabatic Output
Low Electrical Demand
Accessible Cassette and Sump

見積もりリクエスト製品案内

商品紹介

Water is distributed along the top of corrugated media cassettes and flows downward over a large structured surface. Unsaturated air passes through the wetted channels and evaporates part of the water, increasing humidity while reducing dry-bulb temperature. Excess water drains to a stainless sump for recirculation or single-pass discharge, and a downstream separator captures entrained droplets.

主要な特徴

Deep corrugated media provides a large evaporation surface without high-pressure pumps or steam generation.

A full-width distribution header wets each cassette evenly and minimizes dry bypass strips.

The stainless sump, pump and drain connections are exposed below the media for cleaning.

Individual cassettes slide out of the support frame for inspection or replacement.

お客様の製品に関する懸念事項

Wetted-media systems need even water distribution, hygienic drainage and adequate face area to avoid dry zones or droplet carryover.

Uneven water distribution leaves dry media and unstable output.A balanced top header feeds each full-height cassette across the complete face.

Standing sump water accumulates solids and microbial growth.Smooth stainless surfaces, controlled bleed, periodic drain and accessible cleaning limit stagnation.

Excess face velocity carries water into downstream ductwork.Correct module area and a dedicated droplet separator retain entrained moisture.

Scaling blocks media channels and raises pressure drop.Water-quality control, bleed rate and removable cassettes support planned cleaning or replacement.

典型的な用途

Large cleanroom make-up air unitsData-center evaporative coolingPharmaceutical ventilation systemsIndustrial process-air humidificationLow-energy laboratory air handlers

技術的なパラメータ

Typical construction ranges for an in-duct recirculating evaporative media module are shown below.

コア材料	Inorganic glass-fiber or cellulose evaporative media in stainless steel cassette frame
パネルの厚さ	1.2-2.0 mm stainless module and sump panel thickness
有効幅	500-4000 mm active media face width
最大長さ	Up to 5000 mm overall multi-cassette module length
鋼鉄の厚さを直面する	1.2-2.0 mm 304 stainless frame and sump
コア密度	35-80 kg/m³ typical structured evaporative-media density
熱伝導率	Approximately 0.04-0.08 W/(m·K) for dry structured media
表面仕上げ	Passivated stainless frame with blue-green impregnated corrugated media
ジョイントタイプ	Bolted flanged module with slide-out media cassettes, welded sump and union-connected header
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Recirculating or direct-water configurationGlass-fiber or treated cellulose mediaStainless droplet separator and conductivity controlSingle or multiple cassette banks with access section

Planning a Evaporative Media Humidifier specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する