Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de HVAC y manejo de aire para salas limpias
Humidificador de medios evaporativos por
A high-capacity in-duct humidifier that passes air through uniformly wetted corrugated media for low-energy moisture addition and evaporative cooling.
- Uniform Wetted Media
- High-Capacity Adiabatic Output
- Low Electrical Demand
- Accessible Cassette and Sump
Introducción del producto
Water is distributed along the top of corrugated media cassettes and flows downward over a large structured surface. Unsaturated air passes through the wetted channels and evaporates part of the water, increasing humidity while reducing dry-bulb temperature. Excess water drains to a stainless sump for recirculation or single-pass discharge, and a downstream separator captures entrained droplets.
Características clave
A full-width distribution header wets each cassette evenly and minimizes dry bypass strips.
The stainless sump, pump and drain connections are exposed below the media for cleaning.
Individual cassettes slide out of the support frame for inspection or replacement.
Preocupaciones del producto del cliente
Wetted-media systems need even water distribution, hygienic drainage and adequate face area to avoid dry zones or droplet carryover.
Uneven water distribution leaves dry media and unstable output.A balanced top header feeds each full-height cassette across the complete face.
Standing sump water accumulates solids and microbial growth.Smooth stainless surfaces, controlled bleed, periodic drain and accessible cleaning limit stagnation.
Excess face velocity carries water into downstream ductwork.Correct module area and a dedicated droplet separator retain entrained moisture.
Scaling blocks media channels and raises pressure drop.Water-quality control, bleed rate and removable cassettes support planned cleaning or replacement.
Aplicaciones típicas
Large cleanroom make-up air unitsData-center evaporative coolingPharmaceutical ventilation systemsIndustrial process-air humidificationLow-energy laboratory air handlers
Parámetros técnicos
Typical construction ranges for an in-duct recirculating evaporative media module are shown below.
| Materiales Core | Inorganic glass-fiber or cellulose evaporative media in stainless steel cassette frame |
|---|---|
| Panel de espesor | 1.2-2.0 mm stainless module and sump panel thickness |
| Ancho efectivo | 500-4000 mm active media face width |
| Longitud máxima | Up to 5000 mm overall multi-cassette module length |
| Acero frente a espesor | 1.2-2.0 mm 304 stainless frame and sump |
| Densidad Core | 35-80 kg/m³ typical structured evaporative-media density |
| Conductividad térmica | Approximately 0.04-0.08 W/(m·K) for dry structured media |
| Superficie acabada | Passivated stainless frame with blue-green impregnated corrugated media |
| Tipo conjunto | Bolted flanged module with slide-out media cassettes, welded sump and union-connected header |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Recirculating or direct-water configurationGlass-fiber or treated cellulose mediaStainless droplet separator and conductivity controlSingle or multiple cassette banks with access section
Planning a Evaporative Media Humidifier specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
