English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات التدفق والاحتواء الصفائحية
ESD-آمن تدفق رقمي نظيفة مقعد
A clean-air electronics bench combining HEPA-filtered product protection with a grounded static-dissipative work surface and optional balanced ionization.
- Static-Dissipative Worktop
- Grounded Conductive Frame
- Optional Air Ionization
- Separated Power and Grounding
مقدمة المنتج
The ESD-safe clean bench adds a controlled electrical path to the standard clean-air workspace. Its static-dissipative laminate or conductive stainless work surface connects to a dedicated grounding point, while optional overhead ionizers neutralize charge on insulated parts. Electrical outlets and signal connections are routed separately from grounding hardware to keep the workstation organized. The filtered airflow protects particle-sensitive electronics; the ESD features address charge control without changing the bench into a hazardous-material enclosure.
الخصائص الرئيسية
Dedicated wrist-strap and equipment-ground terminals keep personal grounding visible and accessible.
Optional balanced ionizing bars address charge on plastics and other isolated surfaces.
Insulated power channels keep mains wiring separate from signal and ground leads.
A grounding continuity point supports routine checks of the bench bonding network.
مخاوف المنتج للعملاء
Particle control alone does not prevent electrostatic attraction, latent device damage or discharge from isolated materials.
Plastic carriers retain charge even when the bench frame is grounded.A balanced ionization option neutralizes isolated surfaces in the clean airflow.
Operators connect wrist straps to improvised metal points.Clearly positioned ground terminals provide a defined personal grounding connection.
Power cables mix with sensitive measurement leads.Separated utility channels keep mains, signal and grounding paths organized.
Static status becomes uncertain after bench relocation.An accessible bonding point allows continuity and resistance checks after installation.
تطبيقات نموذجية
Semiconductor component inspectionPrinted circuit board assemblySensor and detector packagingPrecision electronics repair in clean areas
المعلمات الفنية
Typical configurable construction ranges for an ESD-safe laminar flow clean bench are listed below.
| المواد الأساسية | Powder-coated steel cabinet with conductive aluminum frame sections and a static-dissipative phenolic worktop |
|---|---|
| سمك اللوحة | 25-40 mm double-wall cabinet sections |
| العرض الفعال | 900-1800 mm clear ESD working width |
| الحد الأقصى الطول | Up to 2400 mm overall bench width |
| الصلب يواجه سمك | 0.8-1.2 mm powder-coated steel enclosure skins |
| الكثافة الأساسية | 1350-1450 kg/m³ solid phenolic worktop core |
| الموصلية الحرارية | 0.25-0.35 W/(m·K) for the phenolic worktop core |
| إنهاء السطح | White powder-coated cabinet with grounded static-dissipative laminate work surface |
| نوع المشترك | Bonded cabinet seams with dedicated earth studs, conductive frame links and gasketed filter mounts |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Overhead balanced ionizing barWrist-strap grounding terminalsConductive stainless worktopESD-safe transparent side panels
Planning a ESD-Safe Laminar Flow Clean Bench specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
