Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Équipement d'écoulement et de confinement laminaires
Banque propre à flux laminar ESD-Safe
A clean-air electronics bench combining HEPA-filtered product protection with a grounded static-dissipative work surface and optional balanced ionization.
- Static-Dissipative Worktop
- Grounded Conductive Frame
- Optional Air Ionization
- Separated Power and Grounding
Introduction de produit
The ESD-safe clean bench adds a controlled electrical path to the standard clean-air workspace. Its static-dissipative laminate or conductive stainless work surface connects to a dedicated grounding point, while optional overhead ionizers neutralize charge on insulated parts. Electrical outlets and signal connections are routed separately from grounding hardware to keep the workstation organized. The filtered airflow protects particle-sensitive electronics; the ESD features address charge control without changing the bench into a hazardous-material enclosure.
Key Features
Dedicated wrist-strap and equipment-ground terminals keep personal grounding visible and accessible.
Optional balanced ionizing bars address charge on plastics and other isolated surfaces.
Insulated power channels keep mains wiring separate from signal and ground leads.
A grounding continuity point supports routine checks of the bench bonding network.
Préoccupations du client produit
Particle control alone does not prevent electrostatic attraction, latent device damage or discharge from isolated materials.
Plastic carriers retain charge even when the bench frame is grounded.A balanced ionization option neutralizes isolated surfaces in the clean airflow.
Operators connect wrist straps to improvised metal points.Clearly positioned ground terminals provide a defined personal grounding connection.
Power cables mix with sensitive measurement leads.Separated utility channels keep mains, signal and grounding paths organized.
Static status becomes uncertain after bench relocation.An accessible bonding point allows continuity and resistance checks after installation.
Les applications typiques
Semiconductor component inspectionPrinted circuit board assemblySensor and detector packagingPrecision electronics repair in clean areas
Paramètres techniques
Typical configurable construction ranges for an ESD-safe laminar flow clean bench are listed below.
| Matériaux de base | Powder-coated steel cabinet with conductive aluminum frame sections and a static-dissipative phenolic worktop |
|---|---|
| Panneau épaisseur | 25-40 mm double-wall cabinet sections |
| Largeur effective | 900-1800 mm clear ESD working width |
| Longueur maximale | Up to 2400 mm overall bench width |
| Acier face épaisseur | 0.8-1.2 mm powder-coated steel enclosure skins |
| Densité Core | 1350-1450 kg/m³ solid phenolic worktop core |
| Conductivité thermique | 0.25-0.35 W/(m·K) for the phenolic worktop core |
| surface finie | White powder-coated cabinet with grounded static-dissipative laminate work surface |
| Type joint | Bonded cabinet seams with dedicated earth studs, conductive frame links and gasketed filter mounts |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Overhead balanced ionizing barWrist-strap grounding terminalsConductive stainless worktopESD-safe transparent side panels
Planning a ESD-Safe Laminar Flow Clean Bench specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
