ESD-safe laminar flow clean bench with grounded work surface

層流 · 封じ込め装置

ESD— セーフラミナールフロークリーンベンチ

A clean-air electronics bench combining HEPA-filtered product protection with a grounded static-dissipative work surface and optional balanced ionization.

Static-Dissipative Worktop
Grounded Conductive Frame
Optional Air Ionization
Separated Power and Grounding

見積もりリクエスト製品案内

商品紹介

The ESD-safe clean bench adds a controlled electrical path to the standard clean-air workspace. Its static-dissipative laminate or conductive stainless work surface connects to a dedicated grounding point, while optional overhead ionizers neutralize charge on insulated parts. Electrical outlets and signal connections are routed separately from grounding hardware to keep the workstation organized. The filtered airflow protects particle-sensitive electronics; the ESD features address charge control without changing the bench into a hazardous-material enclosure.

主要な特徴

A grounded static-dissipative worktop drains charge without the abrupt discharge of a bare conductor.

Dedicated wrist-strap and equipment-ground terminals keep personal grounding visible and accessible.

Optional balanced ionizing bars address charge on plastics and other isolated surfaces.

Insulated power channels keep mains wiring separate from signal and ground leads.

A grounding continuity point supports routine checks of the bench bonding network.

お客様の製品に関する懸念事項

Particle control alone does not prevent electrostatic attraction, latent device damage or discharge from isolated materials.

Plastic carriers retain charge even when the bench frame is grounded.A balanced ionization option neutralizes isolated surfaces in the clean airflow.

Operators connect wrist straps to improvised metal points.Clearly positioned ground terminals provide a defined personal grounding connection.

Power cables mix with sensitive measurement leads.Separated utility channels keep mains, signal and grounding paths organized.

Static status becomes uncertain after bench relocation.An accessible bonding point allows continuity and resistance checks after installation.

典型的な用途

Semiconductor component inspectionPrinted circuit board assemblySensor and detector packagingPrecision electronics repair in clean areas

技術的なパラメータ

Typical configurable construction ranges for an ESD-safe laminar flow clean bench are listed below.

コア材料	Powder-coated steel cabinet with conductive aluminum frame sections and a static-dissipative phenolic worktop
パネルの厚さ	25-40 mm double-wall cabinet sections
有効幅	900-1800 mm clear ESD working width
最大長さ	Up to 2400 mm overall bench width
鋼鉄の厚さを直面する	0.8-1.2 mm powder-coated steel enclosure skins
コア密度	1350-1450 kg/m³ solid phenolic worktop core
熱伝導率	0.25-0.35 W/(m·K) for the phenolic worktop core
表面仕上げ	White powder-coated cabinet with grounded static-dissipative laminate work surface
ジョイントタイプ	Bonded cabinet seams with dedicated earth studs, conductive frame links and gasketed filter mounts
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Overhead balanced ionizing barWrist-strap grounding terminalsConductive stainless worktopESD-safe transparent side panels

Planning a ESD-Safe Laminar Flow Clean Bench specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する