ESD-safe laminar flow clean bench with grounded work surface

Laminar Flow and Containment Equipment 에 대한 리뷰 보기

ESD - 안전 레이미나르 흐름 클린 벤치

A clean-air electronics bench combining HEPA-filtered product protection with a grounded static-dissipative work surface and optional balanced ionization.

Static-Dissipative Worktop
Grounded Conductive Frame
Optional Air Ionization
Separated Power and Grounding

견적 요청 제품 찾아보기

상품 소개

The ESD-safe clean bench adds a controlled electrical path to the standard clean-air workspace. Its static-dissipative laminate or conductive stainless work surface connects to a dedicated grounding point, while optional overhead ionizers neutralize charge on insulated parts. Electrical outlets and signal connections are routed separately from grounding hardware to keep the workstation organized. The filtered airflow protects particle-sensitive electronics; the ESD features address charge control without changing the bench into a hazardous-material enclosure.

주요 기능

A grounded static-dissipative worktop drains charge without the abrupt discharge of a bare conductor.

Dedicated wrist-strap and equipment-ground terminals keep personal grounding visible and accessible.

Optional balanced ionizing bars address charge on plastics and other isolated surfaces.

Insulated power channels keep mains wiring separate from signal and ground leads.

A grounding continuity point supports routine checks of the bench bonding network.

고객 제품 관심사

Particle control alone does not prevent electrostatic attraction, latent device damage or discharge from isolated materials.

Plastic carriers retain charge even when the bench frame is grounded.A balanced ionization option neutralizes isolated surfaces in the clean airflow.

Operators connect wrist straps to improvised metal points.Clearly positioned ground terminals provide a defined personal grounding connection.

Power cables mix with sensitive measurement leads.Separated utility channels keep mains, signal and grounding paths organized.

Static status becomes uncertain after bench relocation.An accessible bonding point allows continuity and resistance checks after installation.

일반적인 응용 프로그램

Semiconductor component inspectionPrinted circuit board assemblySensor and detector packagingPrecision electronics repair in clean areas

기술 매개변수

Typical configurable construction ranges for an ESD-safe laminar flow clean bench are listed below.

핵심 재료	Powder-coated steel cabinet with conductive aluminum frame sections and a static-dissipative phenolic worktop
패널 두께	25-40 mm double-wall cabinet sections
유효 폭	900-1800 mm clear ESD working width
최대 길이	Up to 2400 mm overall bench width
강철 면면 두께	0.8-1.2 mm powder-coated steel enclosure skins
코어 밀도	1350-1450 kg/m³ solid phenolic worktop core
열전도도 (Thermal Conductivity)	0.25-0.35 W/(m·K) for the phenolic worktop core
표면 마무리	White powder-coated cabinet with grounded static-dissipative laminate work surface
접합 유형	Bonded cabinet seams with dedicated earth studs, conductive frame links and gasketed filter mounts
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Overhead balanced ionizing barWrist-strap grounding terminalsConductive stainless worktopESD-safe transparent side panels

Planning a ESD-Safe Laminar Flow Clean Bench specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.