English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
تنظيف الغرف النظيفة والتطهير والتعقيم
جاف معقم الحرارة
A batch dry-heat sterilization and depyrogenation oven with high-temperature recirculation, filtered chamber air, programmable thermal cycles, and controlled cooling.
- Uniform forced-air heating supports repeatable dry-heat cycles
- High-temperature filtration controls particles during heating and cooling
- Interlocked insulated doors protect operators and process zones
مقدمة المنتج
This dry heat sterilizer is intended for glassware, metal tools, components, and other heat-tolerant loads. The insulated chamber, recirculation path, high-temperature filters, and programmable controller support batch sterilization or depyrogenation workflows. Chamber size, door arrangement, loading rack, temperature range, and cooling system are selected for the process.
الخصائص الرئيسية
Forced recirculation with high-temperature fans
High-temperature HEPA filtration option
Multiple chamber temperature sensors
Programmable heat-up, exposure, and cooling stages
Door-temperature safety interlock
Single- or double-door configuration
Validation-probe access port and cycle records
مخاوف المنتج للعملاء
Dry-heat processing requires stable temperature distribution throughout the load and careful control during cooling. Poor airflow, excessive loading, filter degradation, or premature door opening can compromise repeatability and particle control.
How is temperature uniformity managed?Engineered recirculation, distributed sensors, controlled ramp rates, and load-specific mapping establish the operating recipe.
How are particles controlled during cooling?Filtered recirculation continues through critical phases, with compatible high-temperature filters selected for the process.
Can doors open while the chamber is hot?Safety logic prevents release until the chamber meets the configured temperature and cycle-status conditions.
Can process data be retained?The controller records temperature channels, phase times, alarms, and completion status for export or network integration.
تطبيقات نموذجية
Pharmaceutical glassware and componentsVials, containers, and metal toolsLaboratory heat-stable loadsAseptic production supportBatch depyrogenation processesBiotechnology manufacturing
المعلمات الفنية
Electric heaters and high-temperature circulation fans drive filtered air through a stainless chamber. Multiple temperature sensors regulate ramp, exposure, and cooling stages. Single- or double-door versions can maintain controlled airflow and pressure relationships between loading and unloading areas.
| المواد الأساسية | 304 or 316L stainless-steel chamber with high-temperature heater and fan components |
|---|---|
| سمك اللوحة | 80–150 mm thermally insulated oven panels |
| العرض الفعال | 700–1600 mm chamber or cabinet width |
| الحد الأقصى الطول | 1500–3000 mm maximum external dimension |
| الصلب يواجه سمك | 1.0–1.5 mm stainless-steel facing |
| الكثافة الأساسية | 80–140 kg/m³ high-temperature mineral insulation |
| الموصلية الحرارية | 0.040–0.060 W/(m·K) |
| إنهاء السطح | Brushed exterior stainless steel with smooth polished chamber interior |
| نوع المشترك | Continuously welded chamber seams with high-temperature gasketed interlocked doors |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Single or double interlocked doors304 or 316L chamberHigh-temperature HEPA filtersWater-cooled heat exchangerLoading racks and transfer trolleysAdditional validation probesSCADA or MES communication
Planning a Dry Heat Sterilizer specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
