Dry heat sterilizer three-quarter main view

클린룸 청소, 소독 및 소독

건조 열 살균기

A batch dry-heat sterilization and depyrogenation oven with high-temperature recirculation, filtered chamber air, programmable thermal cycles, and controlled cooling.

Uniform forced-air heating supports repeatable dry-heat cycles
High-temperature filtration controls particles during heating and cooling
Interlocked insulated doors protect operators and process zones

견적 요청 제품 찾아보기

상품 소개

This dry heat sterilizer is intended for glassware, metal tools, components, and other heat-tolerant loads. The insulated chamber, recirculation path, high-temperature filters, and programmable controller support batch sterilization or depyrogenation workflows. Chamber size, door arrangement, loading rack, temperature range, and cooling system are selected for the process.

주요 기능

304 or 316L stainless-steel chamber

Forced recirculation with high-temperature fans

High-temperature HEPA filtration option

Multiple chamber temperature sensors

Programmable heat-up, exposure, and cooling stages

Door-temperature safety interlock

Single- or double-door configuration

Validation-probe access port and cycle records

고객 제품 관심사

Dry-heat processing requires stable temperature distribution throughout the load and careful control during cooling. Poor airflow, excessive loading, filter degradation, or premature door opening can compromise repeatability and particle control.

How is temperature uniformity managed?Engineered recirculation, distributed sensors, controlled ramp rates, and load-specific mapping establish the operating recipe.

How are particles controlled during cooling?Filtered recirculation continues through critical phases, with compatible high-temperature filters selected for the process.

Can doors open while the chamber is hot?Safety logic prevents release until the chamber meets the configured temperature and cycle-status conditions.

Can process data be retained?The controller records temperature channels, phase times, alarms, and completion status for export or network integration.

일반적인 응용 프로그램

Pharmaceutical glassware and componentsVials, containers, and metal toolsLaboratory heat-stable loadsAseptic production supportBatch depyrogenation processesBiotechnology manufacturing

기술 매개변수

Electric heaters and high-temperature circulation fans drive filtered air through a stainless chamber. Multiple temperature sensors regulate ramp, exposure, and cooling stages. Single- or double-door versions can maintain controlled airflow and pressure relationships between loading and unloading areas.

핵심 재료	304 or 316L stainless-steel chamber with high-temperature heater and fan components
패널 두께	80–150 mm thermally insulated oven panels
유효 폭	700–1600 mm chamber or cabinet width
최대 길이	1500–3000 mm maximum external dimension
강철 면면 두께	1.0–1.5 mm stainless-steel facing
코어 밀도	80–140 kg/m³ high-temperature mineral insulation
열전도도 (Thermal Conductivity)	0.040–0.060 W/(m·K)
표면 마무리	Brushed exterior stainless steel with smooth polished chamber interior
접합 유형	Continuously welded chamber seams with high-temperature gasketed interlocked doors
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Single or double interlocked doors304 or 316L chamberHigh-temperature HEPA filtersWater-cooled heat exchangerLoading racks and transfer trolleysAdditional validation probesSCADA or MES communication

Planning a Dry Heat Sterilizer specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.