Dry heat sterilizer three-quarter main view

クリーンルームの清掃 · 消毒 · 滅菌

乾燥熱滅菌器

A batch dry-heat sterilization and depyrogenation oven with high-temperature recirculation, filtered chamber air, programmable thermal cycles, and controlled cooling.

Uniform forced-air heating supports repeatable dry-heat cycles
High-temperature filtration controls particles during heating and cooling
Interlocked insulated doors protect operators and process zones

見積もりリクエスト製品案内

商品紹介

This dry heat sterilizer is intended for glassware, metal tools, components, and other heat-tolerant loads. The insulated chamber, recirculation path, high-temperature filters, and programmable controller support batch sterilization or depyrogenation workflows. Chamber size, door arrangement, loading rack, temperature range, and cooling system are selected for the process.

主要な特徴

304 or 316L stainless-steel chamber

Forced recirculation with high-temperature fans

High-temperature HEPA filtration option

Multiple chamber temperature sensors

Programmable heat-up, exposure, and cooling stages

Door-temperature safety interlock

Single- or double-door configuration

Validation-probe access port and cycle records

お客様の製品に関する懸念事項

Dry-heat processing requires stable temperature distribution throughout the load and careful control during cooling. Poor airflow, excessive loading, filter degradation, or premature door opening can compromise repeatability and particle control.

How is temperature uniformity managed?Engineered recirculation, distributed sensors, controlled ramp rates, and load-specific mapping establish the operating recipe.

How are particles controlled during cooling?Filtered recirculation continues through critical phases, with compatible high-temperature filters selected for the process.

Can doors open while the chamber is hot?Safety logic prevents release until the chamber meets the configured temperature and cycle-status conditions.

Can process data be retained?The controller records temperature channels, phase times, alarms, and completion status for export or network integration.

典型的な用途

Pharmaceutical glassware and componentsVials, containers, and metal toolsLaboratory heat-stable loadsAseptic production supportBatch depyrogenation processesBiotechnology manufacturing

技術的なパラメータ

Electric heaters and high-temperature circulation fans drive filtered air through a stainless chamber. Multiple temperature sensors regulate ramp, exposure, and cooling stages. Single- or double-door versions can maintain controlled airflow and pressure relationships between loading and unloading areas.

コア材料	304 or 316L stainless-steel chamber with high-temperature heater and fan components
パネルの厚さ	80–150 mm thermally insulated oven panels
有効幅	700–1600 mm chamber or cabinet width
最大長さ	1500–3000 mm maximum external dimension
鋼鉄の厚さを直面する	1.0–1.5 mm stainless-steel facing
コア密度	80–140 kg/m³ high-temperature mineral insulation
熱伝導率	0.040–0.060 W/(m·K)
表面仕上げ	Brushed exterior stainless steel with smooth polished chamber interior
ジョイントタイプ	Continuously welded chamber seams with high-temperature gasketed interlocked doors
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Single or double interlocked doors304 or 316L chamberHigh-temperature HEPA filtersWater-cooled heat exchangerLoading racks and transfer trolleysAdditional validation probesSCADA or MES communication

Planning a Dry Heat Sterilizer specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する