English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
مرشحات الهواء والترشيح الكيميائي
مرشح الهواء المدمج المتوسط الكفاءة
A short-depth rigid filter designed to upgrade fine-particle capture where a full-depth box or long pocket filter cannot be installed.
- Short Installation Depth
- Deep Mini-Pleat Media
- Rigid Header Interface
- Retrofit-Friendly Footprint
مقدمة المنتج
The compact medium-efficiency air filter uses one or more deep mini-pleat media blocks secured inside a short rigid cell with a full perimeter header. Unlike a long flexible pocket filter, the supported pack retains a fixed outline and requires little downstream clearance. Hot-melt separators regulate pleat spacing, while the sealed frame and optional compression gasket create a defined interface with existing filter tracks. This construction is intended for air-handling units that need ePM1 filtration but have insufficient depth for a 292 mm V-bank or 600 mm pocket configuration.
الخصائص الرئيسية
Deep mini-pleat blocks retain useful media area without projecting into the downstream plenum.
A continuous header offers a stable sealing surface in front-access and side-access tracks.
Rigid pack support eliminates pocket movement near coils, dampers and access doors.
مخاوف المنتج للعملاء
Restricted cabinet depth often prevents an efficiency upgrade unless the media area is packaged into a rigid compact format.
Existing equipment has no clearance for long filter pockets.A fixed short-depth cell keeps the complete filter inside the original track envelope.
A shallow ordinary panel cannot provide enough fine-media area.Deep mini-pleats concentrate substantially more media within the same face dimensions.
Loose retrofit filters leak because their headers do not match the old rack.Selectable header profiles and gaskets create a positive compression interface with the existing frame.
Downstream components contact and abrade unsupported filter bags.The fully enclosed rigid pack maintains clearance from coils, dampers and cabinet hardware.
تطبيقات نموذجية
Retrofit air-handling unitsFan-coil and packaged HVAC systemsCleanroom support-area ventilationHospital refurbishment projectsIntermediate filtration in shallow housings
المعلمات الفنية
Typical construction ranges for a short-depth compact medium-efficiency air filter are shown below.
| المواد الأساسية | Fine glass-fiber or synthetic mini-pleat media with hot-melt separators |
|---|---|
| سمك اللوحة | 95, 120 or 150 mm compact cell depth |
| العرض الفعال | 287-610 mm modular face width |
| الحد الأقصى الطول | Up to 610 mm modular face length |
| الصلب يواجه سمك | 0.45-0.70 mm galvanized-steel header or optional protective faceguard |
| الكثافة الأساسية | Approximately 75-125 kg/m³ nominal assembled compact-pack density |
| الموصلية الحرارية | Approximately 0.034-0.043 W/(m·K) for the dry fiber media |
| إنهاء السطح | White media pack in galvanized steel, molded plastic or anodized aluminum |
| نوع المشترك | Mini-pleat media block bonded into a rigid box cell with a full perimeter header |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
ISO ePM1 50-80% grades95 mm, 120 mm or 150 mm cell depthSingle-header, double-header or box profileFront or downstream gasket location
Planning a Compact Medium-Efficiency Air Filter specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
