Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Filtro de aire y filtración química
Filtro de aire compacto de eficiencia media
A short-depth rigid filter designed to upgrade fine-particle capture where a full-depth box or long pocket filter cannot be installed.
- Short Installation Depth
- Deep Mini-Pleat Media
- Rigid Header Interface
- Retrofit-Friendly Footprint
Introducción del producto
The compact medium-efficiency air filter uses one or more deep mini-pleat media blocks secured inside a short rigid cell with a full perimeter header. Unlike a long flexible pocket filter, the supported pack retains a fixed outline and requires little downstream clearance. Hot-melt separators regulate pleat spacing, while the sealed frame and optional compression gasket create a defined interface with existing filter tracks. This construction is intended for air-handling units that need ePM1 filtration but have insufficient depth for a 292 mm V-bank or 600 mm pocket configuration.
Características clave
Deep mini-pleat blocks retain useful media area without projecting into the downstream plenum.
A continuous header offers a stable sealing surface in front-access and side-access tracks.
Rigid pack support eliminates pocket movement near coils, dampers and access doors.
Preocupaciones del producto del cliente
Restricted cabinet depth often prevents an efficiency upgrade unless the media area is packaged into a rigid compact format.
Existing equipment has no clearance for long filter pockets.A fixed short-depth cell keeps the complete filter inside the original track envelope.
A shallow ordinary panel cannot provide enough fine-media area.Deep mini-pleats concentrate substantially more media within the same face dimensions.
Loose retrofit filters leak because their headers do not match the old rack.Selectable header profiles and gaskets create a positive compression interface with the existing frame.
Downstream components contact and abrade unsupported filter bags.The fully enclosed rigid pack maintains clearance from coils, dampers and cabinet hardware.
Aplicaciones típicas
Retrofit air-handling unitsFan-coil and packaged HVAC systemsCleanroom support-area ventilationHospital refurbishment projectsIntermediate filtration in shallow housings
Parámetros técnicos
Typical construction ranges for a short-depth compact medium-efficiency air filter are shown below.
| Materiales Core | Fine glass-fiber or synthetic mini-pleat media with hot-melt separators |
|---|---|
| Panel de espesor | 95, 120 or 150 mm compact cell depth |
| Ancho efectivo | 287-610 mm modular face width |
| Longitud máxima | Up to 610 mm modular face length |
| Acero frente a espesor | 0.45-0.70 mm galvanized-steel header or optional protective faceguard |
| Densidad Core | Approximately 75-125 kg/m³ nominal assembled compact-pack density |
| Conductividad térmica | Approximately 0.034-0.043 W/(m·K) for the dry fiber media |
| Superficie acabada | White media pack in galvanized steel, molded plastic or anodized aluminum |
| Tipo conjunto | Mini-pleat media block bonded into a rigid box cell with a full perimeter header |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
ISO ePM1 50-80% grades95 mm, 120 mm or 150 mm cell depthSingle-header, double-header or box profileFront or downstream gasket location
Planning a Compact Medium-Efficiency Air Filter specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
