Three-quarter view of a short-depth compact medium-efficiency air filter

エアフィルターと化学ろ過

コンパクトの中間効率の空気フィルター

A short-depth rigid filter designed to upgrade fine-particle capture where a full-depth box or long pocket filter cannot be installed.

Short Installation Depth
Deep Mini-Pleat Media
Rigid Header Interface
Retrofit-Friendly Footprint

見積もりリクエスト製品案内

商品紹介

The compact medium-efficiency air filter uses one or more deep mini-pleat media blocks secured inside a short rigid cell with a full perimeter header. Unlike a long flexible pocket filter, the supported pack retains a fixed outline and requires little downstream clearance. Hot-melt separators regulate pleat spacing, while the sealed frame and optional compression gasket create a defined interface with existing filter tracks. This construction is intended for air-handling units that need ePM1 filtration but have insufficient depth for a 292 mm V-bank or 600 mm pocket configuration.

主要な特徴

A short cell depth fits retrofit cabinets and fan-coil sections with restricted service space.

Deep mini-pleat blocks retain useful media area without projecting into the downstream plenum.

A continuous header offers a stable sealing surface in front-access and side-access tracks.

Rigid pack support eliminates pocket movement near coils, dampers and access doors.

お客様の製品に関する懸念事項

Restricted cabinet depth often prevents an efficiency upgrade unless the media area is packaged into a rigid compact format.

Existing equipment has no clearance for long filter pockets.A fixed short-depth cell keeps the complete filter inside the original track envelope.

A shallow ordinary panel cannot provide enough fine-media area.Deep mini-pleats concentrate substantially more media within the same face dimensions.

Loose retrofit filters leak because their headers do not match the old rack.Selectable header profiles and gaskets create a positive compression interface with the existing frame.

Downstream components contact and abrade unsupported filter bags.The fully enclosed rigid pack maintains clearance from coils, dampers and cabinet hardware.

典型的な用途

Retrofit air-handling unitsFan-coil and packaged HVAC systemsCleanroom support-area ventilationHospital refurbishment projectsIntermediate filtration in shallow housings

技術的なパラメータ

Typical construction ranges for a short-depth compact medium-efficiency air filter are shown below.

コア材料	Fine glass-fiber or synthetic mini-pleat media with hot-melt separators
パネルの厚さ	95, 120 or 150 mm compact cell depth
有効幅	287 — 610 mm のモジュラー面幅
最大長さ	Up to 610 mm modular face length
鋼鉄の厚さを直面する	0.45-0.70 mm galvanized-steel header or optional protective faceguard
コア密度	Approximately 75-125 kg/m³ nominal assembled compact-pack density
熱伝導率	Approximately 0.034-0.043 W/(m·K) for the dry fiber media
表面仕上げ	White media pack in galvanized steel, molded plastic or anodized aluminum
ジョイントタイプ	Mini-pleat media block bonded into a rigid box cell with a full perimeter header
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

ISO ePM1 50-80% grades95 mm, 120 mm or 150 mm cell depthSingle-header, double-header or box profileFront or downstream gasket location

Planning a Compact Medium-Efficiency Air Filter specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する