Three-quarter view of a short-depth compact medium-efficiency air filter

Filter udara dan filtrasi kimia

Filter Udara Efisiensi Menengah Kompak

A short-depth rigid filter designed to upgrade fine-particle capture where a full-depth box or long pocket filter cannot be installed.

Short Installation Depth
Deep Mini-Pleat Media
Rigid Header Interface
Retrofit-Friendly Footprint

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The compact medium-efficiency air filter uses one or more deep mini-pleat media blocks secured inside a short rigid cell with a full perimeter header. Unlike a long flexible pocket filter, the supported pack retains a fixed outline and requires little downstream clearance. Hot-melt separators regulate pleat spacing, while the sealed frame and optional compression gasket create a defined interface with existing filter tracks. This construction is intended for air-handling units that need ePM1 filtration but have insufficient depth for a 292 mm V-bank or 600 mm pocket configuration.

Fitur utama:

A short cell depth fits retrofit cabinets and fan-coil sections with restricted service space.

Deep mini-pleat blocks retain useful media area without projecting into the downstream plenum.

A continuous header offers a stable sealing surface in front-access and side-access tracks.

Rigid pack support eliminates pocket movement near coils, dampers and access doors.

Kekhawatiran produk pelanggan

Restricted cabinet depth often prevents an efficiency upgrade unless the media area is packaged into a rigid compact format.

Existing equipment has no clearance for long filter pockets.A fixed short-depth cell keeps the complete filter inside the original track envelope.

A shallow ordinary panel cannot provide enough fine-media area.Deep mini-pleats concentrate substantially more media within the same face dimensions.

Loose retrofit filters leak because their headers do not match the old rack.Selectable header profiles and gaskets create a positive compression interface with the existing frame.

Downstream components contact and abrade unsupported filter bags.The fully enclosed rigid pack maintains clearance from coils, dampers and cabinet hardware.

Aplikasi yang Tipis

Retrofit air-handling unitsFan-coil and packaged HVAC systemsCleanroom support-area ventilationHospital refurbishment projectsIntermediate filtration in shallow housings

Parameter teknis

Typical construction ranges for a short-depth compact medium-efficiency air filter are shown below.

Bahan inti	Fine glass-fiber or synthetic mini-pleat media with hot-melt separators
Ketebalan Panel (Panel Thickness)	95, 120 or 150 mm compact cell depth
Efektif lebar	287-610 mm modular face width
Panjang maksimum	Up to 610 mm modular face length
Baja menghadap ketebalan	0.45-0.70 mm galvanized-steel header or optional protective faceguard
Kepadatan inti (core density)	Approximately 75-125 kg/m³ nominal assembled compact-pack density
Konduktivitas Termal (Thermal Conductivity)	Approximately 0.034-0.043 W/(m·K) for the dry fiber media
Permukaan selesai	White media pack in galvanized steel, molded plastic or anodized aluminum
Jenis Bersama	Mini-pleat media block bonded into a rigid box cell with a full perimeter header
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

ISO ePM1 50-80% grades95 mm, 120 mm or 150 mm cell depthSingle-header, double-header or box profileFront or downstream gasket location

Planning a Compact Medium-Efficiency Air Filter specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami