English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
إضاءة الغرف النظيفة والمعدات الكهربائية
Cleanroom مأخذ كهربائي
A flush power outlet that contains its socket module, wiring box and perimeter seal behind one smooth cleanable wall plate.
- Flush Hygienic Faceplate
- Concealed Perimeter Gasket
- Color-Coded Power Module
- Rear Sealed Wiring Box
مقدمة المنتج
The cleanroom socket replaces a projecting domestic outlet with a recessed stainless or coated-steel service plate. Its selected receptacle module is mounted through the plate, the perimeter gasket remains hidden behind the flange, and a sealed rear box contains terminals and cable entries. The plate can carry one or more outlets while maintaining an even wall plane around each device.
الخصائص الرئيسية
A concealed gasket seals the complete plate perimeter without an external bead.
Colored inserts distinguish voltage or circuit purpose at a glance.
The rear box separates live terminals from the cleanroom cavity.
Countersunk retained fasteners keep the exposed surface smooth.
مخاوف المنتج للعملاء
Power outlets must remain accessible without creating deep recesses, open wall cavities or ambiguous circuit identification.
A domestic outlet frame leaves multiple dirt-catching ledges.One flat sanitary plate surrounds the complete receptacle module.
Cleaning liquid enters an open wall box.The rear enclosure and cable gland isolate wiring from the room-side opening.
Users connect equipment to the wrong voltage circuit.Color, pin pattern and engraved circuit labels differentiate the supply.
Exposed perimeter sealant tears during repeated wiping.The primary gasket sits concealed behind the rigid faceplate flange.
تطبيقات نموذجية
Cleanroom equipment outletsLaboratory bench powerGowning room utilitiesControlled-area housekeeping circuits
المعلمات الفنية
Typical configurable construction ranges for a cleanroom electrical socket are listed below.
| المواد الأساسية | SUS304 or SUS316L faceplate with engineering-polymer receptacle insert and steel rear wiring box |
|---|---|
| سمك اللوحة | 1.5-3.0 mm hygienic front-plate thickness |
| العرض الفعال | 120-300 mm faceplate width |
| الحد الأقصى الطول | Up to 400 mm overall plate height for multi-outlet layouts |
| الصلب يواجه سمك | 1.5-3.0 mm stainless room-side plate |
| الكثافة الأساسية | Approximately 7900-8000 kg/m³ for austenitic stainless faceplate material |
| الموصلية الحرارية | 14-16 W/(m·K) for the stainless faceplate |
| إنهاء السطح | Fine-brushed or electropolished stainless with colored polymer outlet insert |
| نوع المشترك | Flush recessed plate with concealed perimeter gasket, sealed rear box and cable gland |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Single, duplex or multi-gang outletIEC, regional or pin-and-sleeve receptacleCircuit color and laser markingStainless or white coated plate
Planning a Cleanroom Electrical Socket specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
