Cleanroom electrical socket with stainless flush plate and white receptacle

클린룸 조명 및 전기 장비

클린룸 전기 소켓

A flush power outlet that contains its socket module, wiring box and perimeter seal behind one smooth cleanable wall plate.

Flush Hygienic Faceplate
Concealed Perimeter Gasket
Color-Coded Power Module
Rear Sealed Wiring Box

견적 요청 제품 찾아보기

상품 소개

The cleanroom socket replaces a projecting domestic outlet with a recessed stainless or coated-steel service plate. Its selected receptacle module is mounted through the plate, the perimeter gasket remains hidden behind the flange, and a sealed rear box contains terminals and cable entries. The plate can carry one or more outlets while maintaining an even wall plane around each device.

주요 기능

The broad flush faceplate covers the wall cutout and exposes no rough panel edge.

A concealed gasket seals the complete plate perimeter without an external bead.

Colored inserts distinguish voltage or circuit purpose at a glance.

The rear box separates live terminals from the cleanroom cavity.

Countersunk retained fasteners keep the exposed surface smooth.

고객 제품 관심사

Power outlets must remain accessible without creating deep recesses, open wall cavities or ambiguous circuit identification.

A domestic outlet frame leaves multiple dirt-catching ledges.One flat sanitary plate surrounds the complete receptacle module.

Cleaning liquid enters an open wall box.The rear enclosure and cable gland isolate wiring from the room-side opening.

Users connect equipment to the wrong voltage circuit.Color, pin pattern and engraved circuit labels differentiate the supply.

Exposed perimeter sealant tears during repeated wiping.The primary gasket sits concealed behind the rigid faceplate flange.

일반적인 응용 프로그램

Cleanroom equipment outletsLaboratory bench powerGowning room utilitiesControlled-area housekeeping circuits

기술 매개변수

Typical configurable construction ranges for a cleanroom electrical socket are listed below.

핵심 재료	SUS304 or SUS316L faceplate with engineering-polymer receptacle insert and steel rear wiring box
패널 두께	1.5-3.0 mm hygienic front-plate thickness
유효 폭	120-300 mm faceplate width
최대 길이	Up to 400 mm overall plate height for multi-outlet layouts
강철 면면 두께	1.5-3.0 mm stainless room-side plate
코어 밀도	Approximately 7900-8000 kg/m³ for austenitic stainless faceplate material
열전도도 (Thermal Conductivity)	14-16 W/(m·K) for the stainless faceplate
표면 마무리	Fine-brushed or electropolished stainless with colored polymer outlet insert
접합 유형	Flush recessed plate with concealed perimeter gasket, sealed rear box and cable gland
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Single, duplex or multi-gang outletIEC, regional or pin-and-sleeve receptacleCircuit color and laser markingStainless or white coated plate

Planning a Cleanroom Electrical Socket specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.