แสงสว่างห้องสะอาดและอุปกรณ์ไฟฟ้า
ซ็อกเก็ตไฟฟ้าห้องสะอาด
A flush power outlet that contains its socket module, wiring box and perimeter seal behind one smooth cleanable wall plate.
- Flush Hygienic Faceplate
- Concealed Perimeter Gasket
- Color-Coded Power Module
- Rear Sealed Wiring Box
การแนะนําสินค้า
The cleanroom socket replaces a projecting domestic outlet with a recessed stainless or coated-steel service plate. Its selected receptacle module is mounted through the plate, the perimeter gasket remains hidden behind the flange, and a sealed rear box contains terminals and cable entries. The plate can carry one or more outlets while maintaining an even wall plane around each device.
คุณสมบัติที่สําคัญ
A concealed gasket seals the complete plate perimeter without an external bead.
Colored inserts distinguish voltage or circuit purpose at a glance.
The rear box separates live terminals from the cleanroom cavity.
Countersunk retained fasteners keep the exposed surface smooth.
ความกังวลของลูกค้าเกี่ยวกับผลิตภัณฑ์
Power outlets must remain accessible without creating deep recesses, open wall cavities or ambiguous circuit identification.
A domestic outlet frame leaves multiple dirt-catching ledges.One flat sanitary plate surrounds the complete receptacle module.
Cleaning liquid enters an open wall box.The rear enclosure and cable gland isolate wiring from the room-side opening.
Users connect equipment to the wrong voltage circuit.Color, pin pattern and engraved circuit labels differentiate the supply.
Exposed perimeter sealant tears during repeated wiping.The primary gasket sits concealed behind the rigid faceplate flange.
การใช้งานทั่วไป
Cleanroom equipment outletsLaboratory bench powerGowning room utilitiesControlled-area housekeeping circuits
พารามิเตอร์ทางเทคนิค
Typical configurable construction ranges for a cleanroom electrical socket are listed below.
| วัสดุหลัก | SUS304 or SUS316L faceplate with engineering-polymer receptacle insert and steel rear wiring box |
|---|---|
| ความหนาของแผง | 1.5-3.0 mm hygienic front-plate thickness |
| ความกว้างที่มีประสิทธิภาพ | 120-300 mm faceplate width |
| ความยาวสูงสุด | Up to 400 mm overall plate height for multi-outlet layouts |
| ความหนาของเหล็กหันหน้า | 1.5-3.0 mm stainless room-side plate |
| ความหนาแน่นหลัก | Approximately 7900-8000 kg/m³ for austenitic stainless faceplate material |
| การนําความร้อน | 14-16 W/(m·K) for the stainless faceplate |
| เสร็จสิ้นพื้นผิว | Fine-brushed or electropolished stainless with colored polymer outlet insert |
| ประเภทร่วม | Flush recessed plate with concealed perimeter gasket, sealed rear box and cable gland |
| การปรับแต่ง | สามารถใช้ได้ตามแอปพลิเคชันที่ตั้งใจไว้และสภาพแวดล้อมการทํางาน |
ตัวเลือกที่มีอยู่
Single, duplex or multi-gang outletIEC, regional or pin-and-sleeve receptacleCircuit color and laser markingStainless or white coated plate
Planning a Cleanroom Electrical Socket specification?
ส่งมิติของคุณเงื่อนไขการติดตั้งเป้าหมายประสิทธิภาพและผิวที่ต้องการ

ภาษาอังกฤษ
ภาษาเยอรมัน
ภาษาอาหรับ
ฝรั่งเศส
ภาษาอินโดนีเซีย
ภาษาญี่ปุ่น
ภาษาเกาหลี
ภาษามาเลย์
ภาษาโปรตุเกส
ภาษารัสเซีย
ภาษาสเปน
ภาษาไทยปัจจุบัน
ภาษาตุรกี
ภาษาเวียดนาม