Cleanroom electrical socket with stainless flush plate and white receptacle

Pencahayaan bilik bersih dan peralatan elektrik

Socket elektrik bilik bersih

A flush power outlet that contains its socket module, wiring box and perimeter seal behind one smooth cleanable wall plate.

Flush Hygienic Faceplate
Concealed Perimeter Gasket
Color-Coded Power Module
Rear Sealed Wiring Box

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The cleanroom socket replaces a projecting domestic outlet with a recessed stainless or coated-steel service plate. Its selected receptacle module is mounted through the plate, the perimeter gasket remains hidden behind the flange, and a sealed rear box contains terminals and cable entries. The plate can carry one or more outlets while maintaining an even wall plane around each device.

Ciri-ciri Utama

The broad flush faceplate covers the wall cutout and exposes no rough panel edge.

A concealed gasket seals the complete plate perimeter without an external bead.

Colored inserts distinguish voltage or circuit purpose at a glance.

The rear box separates live terminals from the cleanroom cavity.

Countersunk retained fasteners keep the exposed surface smooth.

Kebimbangan Produk Pelanggan

Power outlets must remain accessible without creating deep recesses, open wall cavities or ambiguous circuit identification.

A domestic outlet frame leaves multiple dirt-catching ledges.One flat sanitary plate surrounds the complete receptacle module.

Cleaning liquid enters an open wall box.The rear enclosure and cable gland isolate wiring from the room-side opening.

Users connect equipment to the wrong voltage circuit.Color, pin pattern and engraved circuit labels differentiate the supply.

Exposed perimeter sealant tears during repeated wiping.The primary gasket sits concealed behind the rigid faceplate flange.

Permohonan yang biasa

Cleanroom equipment outletsLaboratory bench powerGowning room utilitiesControlled-area housekeeping circuits

Parameter teknikal

Typical configurable construction ranges for a cleanroom electrical socket are listed below.

Bahan Teras	SUS304 or SUS316L faceplate with engineering-polymer receptacle insert and steel rear wiring box
Ketebalan Panel	1.5-3.0 mm hygienic front-plate thickness
Lebar berkesan	120-300 mm faceplate width
Panjang maksimum	Up to 400 mm overall plate height for multi-outlet layouts
Keluli Menghadapi Ketebalan	1.5-3.0 mm stainless room-side plate
Ketumpatan teras	Approximately 7900-8000 kg/m³ for austenitic stainless faceplate material
Kekonduksian Terma	14-16 W/(m·K) for the stainless faceplate
Kemasan permukaan	Fine-brushed or electropolished stainless with colored polymer outlet insert
Jenis Bersatu	Flush recessed plate with concealed perimeter gasket, sealed rear box and cable gland
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Single, duplex or multi-gang outletIEC, regional or pin-and-sleeve receptacleCircuit color and laser markingStainless or white coated plate

Planning a Cleanroom Electrical Socket specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami