Cleanroom electrical socket with stainless flush plate and white receptacle

クリーンルーム照明 · 電気機器

クリーンルーム電気ソケット

A flush power outlet that contains its socket module, wiring box and perimeter seal behind one smooth cleanable wall plate.

Flush Hygienic Faceplate
Concealed Perimeter Gasket
Color-Coded Power Module
Rear Sealed Wiring Box

見積もりリクエスト製品案内

商品紹介

The cleanroom socket replaces a projecting domestic outlet with a recessed stainless or coated-steel service plate. Its selected receptacle module is mounted through the plate, the perimeter gasket remains hidden behind the flange, and a sealed rear box contains terminals and cable entries. The plate can carry one or more outlets while maintaining an even wall plane around each device.

主要な特徴

The broad flush faceplate covers the wall cutout and exposes no rough panel edge.

A concealed gasket seals the complete plate perimeter without an external bead.

Colored inserts distinguish voltage or circuit purpose at a glance.

The rear box separates live terminals from the cleanroom cavity.

Countersunk retained fasteners keep the exposed surface smooth.

お客様の製品に関する懸念事項

Power outlets must remain accessible without creating deep recesses, open wall cavities or ambiguous circuit identification.

A domestic outlet frame leaves multiple dirt-catching ledges.One flat sanitary plate surrounds the complete receptacle module.

Cleaning liquid enters an open wall box.The rear enclosure and cable gland isolate wiring from the room-side opening.

Users connect equipment to the wrong voltage circuit.Color, pin pattern and engraved circuit labels differentiate the supply.

Exposed perimeter sealant tears during repeated wiping.The primary gasket sits concealed behind the rigid faceplate flange.

典型的な用途

Cleanroom equipment outletsLaboratory bench powerGowning room utilitiesControlled-area housekeeping circuits

技術的なパラメータ

Typical configurable construction ranges for a cleanroom electrical socket are listed below.

コア材料	SUS304 or SUS316L faceplate with engineering-polymer receptacle insert and steel rear wiring box
パネルの厚さ	1.5-3.0 mm hygienic front-plate thickness
有効幅	120-300 mm faceplate width
最大長さ	Up to 400 mm overall plate height for multi-outlet layouts
鋼鉄の厚さを直面する	1.5-3.0 mm stainless room-side plate
コア密度	Approximately 7900-8000 kg/m³ for austenitic stainless faceplate material
熱伝導率	14-16 W/(m·K) for the stainless faceplate
表面仕上げ	Fine-brushed or electropolished stainless with colored polymer outlet insert
ジョイントタイプ	Flush recessed plate with concealed perimeter gasket, sealed rear box and cable gland
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Single, duplex or multi-gang outletIEC, regional or pin-and-sleeve receptacleCircuit color and laser markingStainless or white coated plate

Planning a Cleanroom Electrical Socket specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する