English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
إضاءة الغرف النظيفة والمعدات الكهربائية
غرف نظيفة مجلس الوزراء التحكم
A hygienic automation cabinet that houses PLC, I/O, power supplies and network hardware behind a sealed cleanable stainless exterior.
- Hygienic Stainless Enclosure
- PLC and I/O Integration
- Sealed Touchscreen Option
- Segregated Power and Signal Wiring
مقدمة المنتج
The cleanroom control cabinet integrates automation hardware in an enclosure designed for frequent wiping and limited particle retention. A sloped or flat smooth roof, concealed or external hygienic hinges and compressed door gasket protect the interior. Power devices, PLC modules, network switches and terminals are arranged in separated wiring zones, while a flush touchscreen and color status stack may be added without open cutouts.
الخصائص الرئيسية
Separated wire ducts keep control signals away from higher-current power conductors.
A flush sealed touchscreen provides recipe and alarm access through the closed door.
DIN-rail hardware and labeled terminals support controlled component replacement.
An internal thermal design uses conductive cooling or a sealed exchanger when heat loads require it.
مخاوف المنتج للعملاء
Automation cabinets generate heat and require service access, but open fans and cluttered wiring are unsuitable inside a controlled room.
Filter fans draw room particles through the control enclosure.A closed cabinet uses passive dissipation or a sealed heat-management option.
Power and signal cables share ducts and introduce electrical noise.Physical segregation and dedicated gland zones preserve wiring separation.
Operators open the cabinet only to acknowledge routine alarms.A flush HMI exposes normal controls while the door remains sealed.
Unlabeled terminal wiring extends troubleshooting time.Numbered ducts, terminals and device tags map each field connection.
تطبيقات نموذجية
Cleanroom process skidsEnvironmental control systemsAutomated pass-throughsProduction line controls
المعلمات الفنية
Typical configurable construction ranges for a cleanroom control cabinet are listed below.
| المواد الأساسية | SUS304 or SUS316L enclosure with PLC, I/O, power supplies, relays, network devices and copper wiring |
|---|---|
| سمك اللوحة | 200-500 mm enclosure depth |
| العرض الفعال | 500-1200 mm usable cabinet width |
| الحد الأقصى الطول | Up to 2200 mm overall floor-standing height |
| الصلب يواجه سمك | 1.5-2.0 mm cabinet body; 2.0 mm door and gland plates |
| الكثافة الأساسية | Approximately 7900-8000 kg/m³ for the stainless cabinet shell |
| الموصلية الحرارية | 14-16 W / (m·K) للعلبة الفولاذية |
| إنهاء السطح | Fine-brushed stainless exterior with black HMI bezel and true-color status indicators |
| نوع المشترك | Continuous-gasket door with hygienic hinges, flush HMI seal and separated power/signal gland plates |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Wall-mounted or floor-standing cabinetPLC and HMI platform selectionSealed heat exchangerRemote I/O and industrial Ethernet
Planning a Cleanroom Control Cabinet specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
