Cleanroom control cabinet with brushed stainless body and color touchscreen

クリーンルーム照明 · 電気機器

クリーンルーム制御キャビネット

A hygienic automation cabinet that houses PLC, I/O, power supplies and network hardware behind a sealed cleanable stainless exterior.

Hygienic Stainless Enclosure
PLC and I/O Integration
Sealed Touchscreen Option
Segregated Power and Signal Wiring

見積もりリクエスト製品案内

商品紹介

The cleanroom control cabinet integrates automation hardware in an enclosure designed for frequent wiping and limited particle retention. A sloped or flat smooth roof, concealed or external hygienic hinges and compressed door gasket protect the interior. Power devices, PLC modules, network switches and terminals are arranged in separated wiring zones, while a flush touchscreen and color status stack may be added without open cutouts.

主要な特徴

The smooth stainless shell avoids external cooling slots on the cleanroom face.

Separated wire ducts keep control signals away from higher-current power conductors.

A flush sealed touchscreen provides recipe and alarm access through the closed door.

DIN-rail hardware and labeled terminals support controlled component replacement.

An internal thermal design uses conductive cooling or a sealed exchanger when heat loads require it.

お客様の製品に関する懸念事項

Automation cabinets generate heat and require service access, but open fans and cluttered wiring are unsuitable inside a controlled room.

Filter fans draw room particles through the control enclosure.A closed cabinet uses passive dissipation or a sealed heat-management option.

Power and signal cables share ducts and introduce electrical noise.Physical segregation and dedicated gland zones preserve wiring separation.

Operators open the cabinet only to acknowledge routine alarms.A flush HMI exposes normal controls while the door remains sealed.

Unlabeled terminal wiring extends troubleshooting time.Numbered ducts, terminals and device tags map each field connection.

典型的な用途

Cleanroom process skidsEnvironmental control systemsAutomated pass-throughsProduction line controls

技術的なパラメータ

Typical configurable construction ranges for a cleanroom control cabinet are listed below.

コア材料	SUS304 or SUS316L enclosure with PLC, I/O, power supplies, relays, network devices and copper wiring
パネルの厚さ	200-500 mm enclosure depth
有効幅	500-1200 mm usable cabinet width
最大長さ	Up to 2200 mm overall floor-standing height
鋼鉄の厚さを直面する	1.5-2.0 mm cabinet body; 2.0 mm door and gland plates
コア密度	Approximately 7900-8000 kg/m³ for the stainless cabinet shell
熱伝導率	14 — 16 W / （ m · K ）ステンレスエンクロージャ
表面仕上げ	Fine-brushed stainless exterior with black HMI bezel and true-color status indicators
ジョイントタイプ	Continuous-gasket door with hygienic hinges, flush HMI seal and separated power/signal gland plates
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Wall-mounted or floor-standing cabinetPLC and HMI platform selectionSealed heat exchangerRemote I/O and industrial Ethernet

Planning a Cleanroom Control Cabinet specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する