Cleanroom control cabinet with brushed stainless body and color touchscreen

Освещение и электрическое оборудование в чистых помещениях

Контрольный кабинет для чистых помещений

A hygienic automation cabinet that houses PLC, I/O, power supplies and network hardware behind a sealed cleanable stainless exterior.

Hygienic Stainless Enclosure
PLC and I/O Integration
Sealed Touchscreen Option
Segregated Power and Signal Wiring

Запрос котировки Просмотреть продукты

Введение продукции

The cleanroom control cabinet integrates automation hardware in an enclosure designed for frequent wiping and limited particle retention. A sloped or flat smooth roof, concealed or external hygienic hinges and compressed door gasket protect the interior. Power devices, PLC modules, network switches and terminals are arranged in separated wiring zones, while a flush touchscreen and color status stack may be added without open cutouts.

Основные характеристики

The smooth stainless shell avoids external cooling slots on the cleanroom face.

Separated wire ducts keep control signals away from higher-current power conductors.

A flush sealed touchscreen provides recipe and alarm access through the closed door.

DIN-rail hardware and labeled terminals support controlled component replacement.

An internal thermal design uses conductive cooling or a sealed exchanger when heat loads require it.

Обеспокоенность клиентов продуктами

Automation cabinets generate heat and require service access, but open fans and cluttered wiring are unsuitable inside a controlled room.

Filter fans draw room particles through the control enclosure.A closed cabinet uses passive dissipation or a sealed heat-management option.

Power and signal cables share ducts and introduce electrical noise.Physical segregation and dedicated gland zones preserve wiring separation.

Operators open the cabinet only to acknowledge routine alarms.A flush HMI exposes normal controls while the door remains sealed.

Unlabeled terminal wiring extends troubleshooting time.Numbered ducts, terminals and device tags map each field connection.

Типичные приложения

Cleanroom process skidsEnvironmental control systemsAutomated pass-throughsProduction line controls

Технические параметры

Typical configurable construction ranges for a cleanroom control cabinet are listed below.

Основной материал	SUS304 or SUS316L enclosure with PLC, I/O, power supplies, relays, network devices and copper wiring
Толщина панели	200-500 mm enclosure depth
эффективная ширина	500-1200 mm usable cabinet width
Максимальная длина	Up to 2200 mm overall floor-standing height
Толщина линий стали	1.5-2.0 mm cabinet body; 2.0 mm door and gland plates
Плотность ядра	Approximately 7900-8000 kg/m³ for the stainless cabinet shell
Теплопроводимость	14-16 W/(m·K) for the stainless enclosure
Поверхностная отделка	Fine-brushed stainless exterior with black HMI bezel and true-color status indicators
Объединенный тип	Continuous-gasket door with hygienic hinges, flush HMI seal and separated power/signal gland plates
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Wall-mounted or floor-standing cabinetPLC and HMI platform selectionSealed heat exchangerRemote I/O and industrial Ethernet

Planning a Cleanroom Control Cabinet specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой