Cleanroom control cabinet with brushed stainless body and color touchscreen

클린룸 조명 및 전기 장비

클린룸 제어 캐비닛

A hygienic automation cabinet that houses PLC, I/O, power supplies and network hardware behind a sealed cleanable stainless exterior.

Hygienic Stainless Enclosure
PLC and I/O Integration
Sealed Touchscreen Option
Segregated Power and Signal Wiring

견적 요청 제품 찾아보기

상품 소개

The cleanroom control cabinet integrates automation hardware in an enclosure designed for frequent wiping and limited particle retention. A sloped or flat smooth roof, concealed or external hygienic hinges and compressed door gasket protect the interior. Power devices, PLC modules, network switches and terminals are arranged in separated wiring zones, while a flush touchscreen and color status stack may be added without open cutouts.

주요 기능

The smooth stainless shell avoids external cooling slots on the cleanroom face.

Separated wire ducts keep control signals away from higher-current power conductors.

A flush sealed touchscreen provides recipe and alarm access through the closed door.

DIN-rail hardware and labeled terminals support controlled component replacement.

An internal thermal design uses conductive cooling or a sealed exchanger when heat loads require it.

고객 제품 관심사

Automation cabinets generate heat and require service access, but open fans and cluttered wiring are unsuitable inside a controlled room.

Filter fans draw room particles through the control enclosure.A closed cabinet uses passive dissipation or a sealed heat-management option.

Power and signal cables share ducts and introduce electrical noise.Physical segregation and dedicated gland zones preserve wiring separation.

Operators open the cabinet only to acknowledge routine alarms.A flush HMI exposes normal controls while the door remains sealed.

Unlabeled terminal wiring extends troubleshooting time.Numbered ducts, terminals and device tags map each field connection.

일반적인 응용 프로그램

Cleanroom process skidsEnvironmental control systemsAutomated pass-throughsProduction line controls

기술 매개변수

Typical configurable construction ranges for a cleanroom control cabinet are listed below.

핵심 재료	SUS304 or SUS316L enclosure with PLC, I/O, power supplies, relays, network devices and copper wiring
패널 두께	200-500 mm enclosure depth
유효 폭	500-1200 mm usable cabinet width
최대 길이	Up to 2200 mm overall floor-standing height
강철 면면 두께	1.5-2.0 mm cabinet body; 2.0 mm door and gland plates
코어 밀도	Approximately 7900-8000 kg/m³ for the stainless cabinet shell
열전도도 (Thermal Conductivity)	스테인레스 케이스용 14 - 16 W / (m · K)
표면 마무리	Fine-brushed stainless exterior with black HMI bezel and true-color status indicators
접합 유형	Continuous-gasket door with hygienic hinges, flush HMI seal and separated power/signal gland plates
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Wall-mounted or floor-standing cabinetPLC and HMI platform selectionSealed heat exchangerRemote I/O and industrial Ethernet

Planning a Cleanroom Control Cabinet specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.