Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Iluminación de sala limpia y equipos eléctricos
Gabinete de control de sala limpia por
A hygienic automation cabinet that houses PLC, I/O, power supplies and network hardware behind a sealed cleanable stainless exterior.
- Hygienic Stainless Enclosure
- PLC and I/O Integration
- Sealed Touchscreen Option
- Segregated Power and Signal Wiring
Introducción del producto
The cleanroom control cabinet integrates automation hardware in an enclosure designed for frequent wiping and limited particle retention. A sloped or flat smooth roof, concealed or external hygienic hinges and compressed door gasket protect the interior. Power devices, PLC modules, network switches and terminals are arranged in separated wiring zones, while a flush touchscreen and color status stack may be added without open cutouts.
Características clave
Separated wire ducts keep control signals away from higher-current power conductors.
A flush sealed touchscreen provides recipe and alarm access through the closed door.
DIN-rail hardware and labeled terminals support controlled component replacement.
An internal thermal design uses conductive cooling or a sealed exchanger when heat loads require it.
Preocupaciones del producto del cliente
Automation cabinets generate heat and require service access, but open fans and cluttered wiring are unsuitable inside a controlled room.
Filter fans draw room particles through the control enclosure.A closed cabinet uses passive dissipation or a sealed heat-management option.
Power and signal cables share ducts and introduce electrical noise.Physical segregation and dedicated gland zones preserve wiring separation.
Operators open the cabinet only to acknowledge routine alarms.A flush HMI exposes normal controls while the door remains sealed.
Unlabeled terminal wiring extends troubleshooting time.Numbered ducts, terminals and device tags map each field connection.
Aplicaciones típicas
Cleanroom process skidsEnvironmental control systemsAutomated pass-throughsProduction line controls
Parámetros técnicos
Typical configurable construction ranges for a cleanroom control cabinet are listed below.
| Materiales Core | SUS304 or SUS316L enclosure with PLC, I/O, power supplies, relays, network devices and copper wiring |
|---|---|
| Panel de espesor | 200-500 mm enclosure depth |
| Ancho efectivo | 500-1200 mm usable cabinet width |
| Longitud máxima | Up to 2200 mm overall floor-standing height |
| Acero frente a espesor | 1.5-2.0 mm cabinet body; 2.0 mm door and gland plates |
| Densidad Core | Approximately 7900-8000 kg/m³ for the stainless cabinet shell |
| Conductividad térmica | 14 - 16 W / (m · K) para el recinto inoxidable por |
| Superficie acabada | Fine-brushed stainless exterior with black HMI bezel and true-color status indicators |
| Tipo conjunto | Continuous-gasket door with hygienic hinges, flush HMI seal and separated power/signal gland plates |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Wall-mounted or floor-standing cabinetPLC and HMI platform selectionSealed heat exchangerRemote I/O and industrial Ethernet
Planning a Cleanroom Control Cabinet specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
