English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
مرشحات الهواء والترشيح الكيميائي
Bag-In / Bag-Out HEPA تصفية الإسكان
A welded side-access housing that uses a continuous PVC change bag to isolate service personnel from a contaminated HEPA or molecular filter.
- Contained Filter Change
- Continuous Bagging Collar
- Positive Filter Clamping
- Welded Stainless Housing
مقدمة المنتج
The BIBO housing encloses each filter behind a sealed service door and an external bagging ring. Before the door is opened, a transparent change bag is attached to the collar so the used element can be released, enclosed and removed without direct contact with the dirty plenum. An internal clamping mechanism compresses a gasket-seal or gel-seal filter uniformly against its sealing surface. Fully welded stainless construction and flanged duct connections form a durable containment section for hazardous exhaust systems.
الخصائص الرئيسية
Independent filter clamps apply controlled pressure around the complete sealing perimeter.
A removable door gasket isolates the service opening during normal operation.
Modular one- and multi-wide sections support particulate and molecular filter stages.
مخاوف المنتج للعملاء
Filter replacement in contaminated exhaust can expose technicians and release captured material unless the service opening remains enclosed.
Opening a conventional access door exposes the loaded filter face.The attached change bag forms a flexible barrier around the filter during removal.
A filter is installed unevenly and leaks at one corner.A guided clamping system applies uniform compression across the gasket or gel interface.
The bag slips from the collar while the old element is being handled.Raised bagging rings, security straps and cinching bands retain the barrier at the service port.
Multiple stages require separate, poorly sealed field enclosures.Welded modular housings can combine prefilter, HEPA and molecular stages in one flanged train.
تطبيقات نموذجية
Biosafety laboratory exhaustPharmaceutical containment suitesHospital isolation exhaustHazardous chemical ventilationRadioisotope handling facilities
المعلمات الفنية
Representative construction ranges for a modular BIBO filter housing are listed below.
| المواد الأساسية | Fully welded 304 or 316 stainless-steel housing with internal stainless filter clamping hardware |
|---|---|
| سمك اللوحة | 1.5–3.0 mm welded housing panels |
| العرض الفعال | 305–1830 mm for one- to three-filter-wide modules |
| الحد الأقصى الطول | Up to 2440 mm per multi-stage housing train |
| الصلب يواجه سمك | 1.5–3.0 mm 304 or 316 stainless-steel casing and doors |
| الكثافة الأساسية | Approximately 8000 kg/m³ for 304 stainless-steel housing components |
| الموصلية الحرارية | Approximately 15 W/(m·K) at room temperature for the welded 304 stainless enclosure |
| إنهاء السطح | Continuous welded, cleaned and brushed stainless-steel finish |
| نوع المشترك | Flanged duct joints, gasketed access door and PVC bagging collar with contained clamp mechanism |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Gasket-seal or gel-seal filtersOne- or multi-stage constructionBubble-tight isolation dampersTest ports and injection sections
Planning a Bag-In/Bag-Out HEPA Filter Housing specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
