Three-quarter view of stainless bag-in bag-out HEPA filter housing

エアフィルターと化学ろ過

Bag—In / Bag—Out の HEPA フィルターハウジング

A welded side-access housing that uses a continuous PVC change bag to isolate service personnel from a contaminated HEPA or molecular filter.

Contained Filter Change
Continuous Bagging Collar
Positive Filter Clamping
Welded Stainless Housing

見積もりリクエスト製品案内

商品紹介

The BIBO housing encloses each filter behind a sealed service door and an external bagging ring. Before the door is opened, a transparent change bag is attached to the collar so the used element can be released, enclosed and removed without direct contact with the dirty plenum. An internal clamping mechanism compresses a gasket-seal or gel-seal filter uniformly against its sealing surface. Fully welded stainless construction and flanged duct connections form a durable containment section for hazardous exhaust systems.

主要な特徴

A dedicated bagging collar retains the change bag throughout removal and replacement.

Independent filter clamps apply controlled pressure around the complete sealing perimeter.

A removable door gasket isolates the service opening during normal operation.

Modular one- and multi-wide sections support particulate and molecular filter stages.

お客様の製品に関する懸念事項

Filter replacement in contaminated exhaust can expose technicians and release captured material unless the service opening remains enclosed.

Opening a conventional access door exposes the loaded filter face.The attached change bag forms a flexible barrier around the filter during removal.

A filter is installed unevenly and leaks at one corner.A guided clamping system applies uniform compression across the gasket or gel interface.

The bag slips from the collar while the old element is being handled.Raised bagging rings, security straps and cinching bands retain the barrier at the service port.

Multiple stages require separate, poorly sealed field enclosures.Welded modular housings can combine prefilter, HEPA and molecular stages in one flanged train.

典型的な用途

Biosafety laboratory exhaustPharmaceutical containment suitesHospital isolation exhaustHazardous chemical ventilationRadioisotope handling facilities

技術的なパラメータ

Representative construction ranges for a modular BIBO filter housing are listed below.

コア材料	Fully welded 304 or 316 stainless-steel housing with internal stainless filter clamping hardware
パネルの厚さ	1.5–3.0 mm welded housing panels
有効幅	305–1830 mm for one- to three-filter-wide modules
最大長さ	Up to 2440 mm per multi-stage housing train
鋼鉄の厚さを直面する	1.5–3.0 mm 304 or 316 stainless-steel casing and doors
コア密度	Approximately 8000 kg/m³ for 304 stainless-steel housing components
熱伝導率	Approximately 15 W/(m·K) at room temperature for the welded 304 stainless enclosure
表面仕上げ	Continuous welded, cleaned and brushed stainless-steel finish
ジョイントタイプ	Flanged duct joints, gasketed access door and PVC bagging collar with contained clamp mechanism
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Gasket-seal or gel-seal filtersOne- or multi-stage constructionBubble-tight isolation dampersTest ports and injection sections

Planning a Bag-In/Bag-Out HEPA Filter Housing specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する