Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Luftfilter und chemische Filtration
Bag-In / Bag-Out HEPA Filtergehäuse
A welded side-access housing that uses a continuous PVC change bag to isolate service personnel from a contaminated HEPA or molecular filter.
- Contained Filter Change
- Continuous Bagging Collar
- Positive Filter Clamping
- Welded Stainless Housing
Produkteinführung
The BIBO housing encloses each filter behind a sealed service door and an external bagging ring. Before the door is opened, a transparent change bag is attached to the collar so the used element can be released, enclosed and removed without direct contact with the dirty plenum. An internal clamping mechanism compresses a gasket-seal or gel-seal filter uniformly against its sealing surface. Fully welded stainless construction and flanged duct connections form a durable containment section for hazardous exhaust systems.
Key Features
Independent filter clamps apply controlled pressure around the complete sealing perimeter.
A removable door gasket isolates the service opening during normal operation.
Modular one- and multi-wide sections support particulate and molecular filter stages.
Kunden Produktbedenken
Filter replacement in contaminated exhaust can expose technicians and release captured material unless the service opening remains enclosed.
Opening a conventional access door exposes the loaded filter face.The attached change bag forms a flexible barrier around the filter during removal.
A filter is installed unevenly and leaks at one corner.A guided clamping system applies uniform compression across the gasket or gel interface.
The bag slips from the collar while the old element is being handled.Raised bagging rings, security straps and cinching bands retain the barrier at the service port.
Multiple stages require separate, poorly sealed field enclosures.Welded modular housings can combine prefilter, HEPA and molecular stages in one flanged train.
Typische Anwendungen
Biosafety laboratory exhaustPharmaceutical containment suitesHospital isolation exhaustHazardous chemical ventilationRadioisotope handling facilities
Technische Parameter
Representative construction ranges for a modular BIBO filter housing are listed below.
| Core Material | Fully welded 304 or 316 stainless-steel housing with internal stainless filter clamping hardware |
|---|---|
| Panel Dicke | 1.5–3.0 mm welded housing panels |
| Effektive Breite | 305–1830 mm for one- to three-filter-wide modules |
| Maximale Länge | Up to 2440 mm per multi-stage housing train |
| Stahl facing Dicke | 1.5–3.0 mm 304 or 316 stainless-steel casing and doors |
| Kerndichte | Approximately 8000 kg/m³ for 304 stainless-steel housing components |
| Thermische Leitfähigkeit | Approximately 15 W/(m·K) at room temperature for the welded 304 stainless enclosure |
| Oberfläche Finish | Continuous welded, cleaned and brushed stainless-steel finish |
| Gemeinsamer Typ | Flanged duct joints, gasketed access door and PVC bagging collar with contained clamp mechanism |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Gasket-seal or gel-seal filtersOne- or multi-stage constructionBubble-tight isolation dampersTest ports and injection sections
Planning a Bag-In/Bag-Out HEPA Filter Housing specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
