English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Воздушные фильтры и химическая фильтрация
Корпус фильтров HEPA с мешкой в / с мешкой в
A welded side-access housing that uses a continuous PVC change bag to isolate service personnel from a contaminated HEPA or molecular filter.
- Contained Filter Change
- Continuous Bagging Collar
- Positive Filter Clamping
- Welded Stainless Housing
Введение продукции
The BIBO housing encloses each filter behind a sealed service door and an external bagging ring. Before the door is opened, a transparent change bag is attached to the collar so the used element can be released, enclosed and removed without direct contact with the dirty plenum. An internal clamping mechanism compresses a gasket-seal or gel-seal filter uniformly against its sealing surface. Fully welded stainless construction and flanged duct connections form a durable containment section for hazardous exhaust systems.
Основные характеристики
Independent filter clamps apply controlled pressure around the complete sealing perimeter.
A removable door gasket isolates the service opening during normal operation.
Modular one- and multi-wide sections support particulate and molecular filter stages.
Обеспокоенность клиентов продуктами
Filter replacement in contaminated exhaust can expose technicians and release captured material unless the service opening remains enclosed.
Opening a conventional access door exposes the loaded filter face.The attached change bag forms a flexible barrier around the filter during removal.
A filter is installed unevenly and leaks at one corner.A guided clamping system applies uniform compression across the gasket or gel interface.
The bag slips from the collar while the old element is being handled.Raised bagging rings, security straps and cinching bands retain the barrier at the service port.
Multiple stages require separate, poorly sealed field enclosures.Welded modular housings can combine prefilter, HEPA and molecular stages in one flanged train.
Типичные приложения
Biosafety laboratory exhaustPharmaceutical containment suitesHospital isolation exhaustHazardous chemical ventilationRadioisotope handling facilities
Технические параметры
Representative construction ranges for a modular BIBO filter housing are listed below.
| Основной материал | Fully welded 304 or 316 stainless-steel housing with internal stainless filter clamping hardware |
|---|---|
| Толщина панели | 1.5–3.0 mm welded housing panels |
| эффективная ширина | 305–1830 mm for one- to three-filter-wide modules |
| Максимальная длина | Up to 2440 mm per multi-stage housing train |
| Толщина линий стали | 1.5–3.0 mm 304 or 316 stainless-steel casing and doors |
| Плотность ядра | Approximately 8000 kg/m³ for 304 stainless-steel housing components |
| Теплопроводимость | Approximately 15 W/(m·K) at room temperature for the welded 304 stainless enclosure |
| Поверхностная отделка | Continuous welded, cleaned and brushed stainless-steel finish |
| Объединенный тип | Flanged duct joints, gasketed access door and PVC bagging collar with contained clamp mechanism |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Gasket-seal or gel-seal filtersOne- or multi-stage constructionBubble-tight isolation dampersTest ports and injection sections
Planning a Bag-In/Bag-Out HEPA Filter Housing specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
