Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Filtro de aire y filtración química
Bag-In / Bag-Out carcasa de filtro HEPA
A welded side-access housing that uses a continuous PVC change bag to isolate service personnel from a contaminated HEPA or molecular filter.
- Contained Filter Change
- Continuous Bagging Collar
- Positive Filter Clamping
- Welded Stainless Housing
Introducción del producto
The BIBO housing encloses each filter behind a sealed service door and an external bagging ring. Before the door is opened, a transparent change bag is attached to the collar so the used element can be released, enclosed and removed without direct contact with the dirty plenum. An internal clamping mechanism compresses a gasket-seal or gel-seal filter uniformly against its sealing surface. Fully welded stainless construction and flanged duct connections form a durable containment section for hazardous exhaust systems.
Características clave
Independent filter clamps apply controlled pressure around the complete sealing perimeter.
A removable door gasket isolates the service opening during normal operation.
Modular one- and multi-wide sections support particulate and molecular filter stages.
Preocupaciones del producto del cliente
Filter replacement in contaminated exhaust can expose technicians and release captured material unless the service opening remains enclosed.
Opening a conventional access door exposes the loaded filter face.The attached change bag forms a flexible barrier around the filter during removal.
A filter is installed unevenly and leaks at one corner.A guided clamping system applies uniform compression across the gasket or gel interface.
The bag slips from the collar while the old element is being handled.Raised bagging rings, security straps and cinching bands retain the barrier at the service port.
Multiple stages require separate, poorly sealed field enclosures.Welded modular housings can combine prefilter, HEPA and molecular stages in one flanged train.
Aplicaciones típicas
Biosafety laboratory exhaustPharmaceutical containment suitesHospital isolation exhaustHazardous chemical ventilationRadioisotope handling facilities
Parámetros técnicos
Representative construction ranges for a modular BIBO filter housing are listed below.
| Materiales Core | Fully welded 304 or 316 stainless-steel housing with internal stainless filter clamping hardware |
|---|---|
| Panel de espesor | 1.5–3.0 mm welded housing panels |
| Ancho efectivo | 305–1830 mm for one- to three-filter-wide modules |
| Longitud máxima | Up to 2440 mm per multi-stage housing train |
| Acero frente a espesor | 1.5–3.0 mm 304 or 316 stainless-steel casing and doors |
| Densidad Core | Approximately 8000 kg/m³ for 304 stainless-steel housing components |
| Conductividad térmica | Approximately 15 W/(m·K) at room temperature for the welded 304 stainless enclosure |
| Superficie acabada | Continuous welded, cleaned and brushed stainless-steel finish |
| Tipo conjunto | Flanged duct joints, gasketed access door and PVC bagging collar with contained clamp mechanism |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Gasket-seal or gel-seal filtersOne- or multi-stage constructionBubble-tight isolation dampersTest ports and injection sections
Planning a Bag-In/Bag-Out HEPA Filter Housing specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
