English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات إزالة التلوث للموظفين والمواد
Aالتلقائي محطة التمهيد الغسيل والتطهير
A walk-through footwear station that brush-washes boot soles and sides, with configurable application of a compatible hygiene solution.
- Rotating sole and side brushes
- Configurable solution stage
- Guided walk-through lane
- Drainable stainless steel basin
مقدمة المنتج
The Automatic Boot Washing and Disinfection Station first uses rotating brushes to remove visible soil from the sole and lower boot surfaces. A separate metered stage can apply a facility-selected compatible hygiene solution by spray or controlled shallow contact, according to the operating procedure. Brush modules, a debris screen and the stainless basin remain accessible for routine cleaning and solution replacement; the final solution choice and use conditions are configured for the intended environment.
الخصائص الرئيسية
A configurable spray or shallow-contact stage can apply a compatible hygiene solution.
Metered feed can be linked to the occupied walk-through cycle.
A removable debris screen protects the liquid zone from larger material.
The drainable stainless basin and brush cassettes support routine wash-down access.
مخاوف المنتج للعملاء
Boot hygiene may require both mechanical soil removal and a defined solution-application step, with the details set by the facility's own procedure.
A solution-only mat is quickly fouled by visible soil on boots.Rotating brushes remove loose residue before the configured solution stage.
Manual application varies in coverage and replenishment practice.A metered spray or shallow-contact module can be set up for the selected operating procedure.
Debris enters the liquid zone and obstructs service components.A removable debris screen captures larger material before routine cleaning.
Deep liquid coverage is unsuitable for some footwear and entry routes.The unit can use targeted spray or a shallow contact zone limited to the required boot area.
تطبيقات نموذجية
Food and beverage production entriesAnimal-health facility hygiene routesPharmaceutical utility areasControlled agricultural processingWet hygiene airlocks
المعلمات الفنية
Brush layout, liquid-contact method and solution-management hardware are configured for the footwear, process and site procedure.
| المواد الأساسية | Polypropylene brush cores and chemical-resistant fluid components in a welded SUS304 frame |
|---|---|
| سمك اللوحة | 1.5–2.0 mm stainless steel body panels |
| العرض الفعال | 450–700 mm clear passage |
| الحد الأقصى الطول | 1000–2200 mm washing and solution lane length |
| الصلب يواجه سمك | 1.5–2.0 mm SUS304 |
| الكثافة الأساسية | 900–1100 kg/m³ for polypropylene brush cores |
| الموصلية الحرارية | 0.10–0.22 W/(m·K) for polymer brush components |
| إنهاء السطح | Brushed SUS304 with chemical-resistant seals and non-slip grating |
| نوع المشترك | Welded drainable basin with removable brush modules and solution manifold |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Brush-only wash or combined wash-and-solution stagesSpray or shallow-contact solution methodSolution feed monitoring interfaceInterlocked exit-gate signal
Planning a Automatic Boot Washing and Disinfection Station specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
