Automatic boot washing and disinfection station with rotating brushes

인력 및 재료 오염 제거 장비

자동 부트 세척 및 소독 스테이션

A walk-through footwear station that brush-washes boot soles and sides, with configurable application of a compatible hygiene solution.

Rotating sole and side brushes
Configurable solution stage
Guided walk-through lane
Drainable stainless steel basin

견적 요청 제품 찾아보기

상품 소개

The Automatic Boot Washing and Disinfection Station first uses rotating brushes to remove visible soil from the sole and lower boot surfaces. A separate metered stage can apply a facility-selected compatible hygiene solution by spray or controlled shallow contact, according to the operating procedure. Brush modules, a debris screen and the stainless basin remain accessible for routine cleaning and solution replacement; the final solution choice and use conditions are configured for the intended environment.

주요 기능

Rotating sole brushes and side brushes provide mechanical washing of boot contact areas.

A configurable spray or shallow-contact stage can apply a compatible hygiene solution.

Metered feed can be linked to the occupied walk-through cycle.

A removable debris screen protects the liquid zone from larger material.

The drainable stainless basin and brush cassettes support routine wash-down access.

고객 제품 관심사

Boot hygiene may require both mechanical soil removal and a defined solution-application step, with the details set by the facility's own procedure.

A solution-only mat is quickly fouled by visible soil on boots.Rotating brushes remove loose residue before the configured solution stage.

Manual application varies in coverage and replenishment practice.A metered spray or shallow-contact module can be set up for the selected operating procedure.

Debris enters the liquid zone and obstructs service components.A removable debris screen captures larger material before routine cleaning.

Deep liquid coverage is unsuitable for some footwear and entry routes.The unit can use targeted spray or a shallow contact zone limited to the required boot area.

일반적인 응용 프로그램

Food and beverage production entriesAnimal-health facility hygiene routesPharmaceutical utility areasControlled agricultural processingWet hygiene airlocks

기술 매개변수

Brush layout, liquid-contact method and solution-management hardware are configured for the footwear, process and site procedure.

핵심 재료	Polypropylene brush cores and chemical-resistant fluid components in a welded SUS304 frame
패널 두께	1.5–2.0 mm stainless steel body panels
유효 폭	450–700 mm clear passage
최대 길이	1000–2200 mm washing and solution lane length
강철 면면 두께	1.5–2.0 mm SUS304
코어 밀도	900–1100 kg/m³ for polypropylene brush cores
열전도도 (Thermal Conductivity)	0.10–0.22 W/(m·K) for polymer brush components
표면 마무리	Brushed SUS304 with chemical-resistant seals and non-slip grating
접합 유형	Welded drainable basin with removable brush modules and solution manifold
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Brush-only wash or combined wash-and-solution stagesSpray or shallow-contact solution methodSolution feed monitoring interfaceInterlocked exit-gate signal

Planning a Automatic Boot Washing and Disinfection Station specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.