Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Equipement de décontamination du personnel et du matériel
Station automatique de lavage et de désinfection des bottes
A walk-through footwear station that brush-washes boot soles and sides, with configurable application of a compatible hygiene solution.
- Rotating sole and side brushes
- Configurable solution stage
- Guided walk-through lane
- Drainable stainless steel basin
Introduction de produit
The Automatic Boot Washing and Disinfection Station first uses rotating brushes to remove visible soil from the sole and lower boot surfaces. A separate metered stage can apply a facility-selected compatible hygiene solution by spray or controlled shallow contact, according to the operating procedure. Brush modules, a debris screen and the stainless basin remain accessible for routine cleaning and solution replacement; the final solution choice and use conditions are configured for the intended environment.
Key Features
A configurable spray or shallow-contact stage can apply a compatible hygiene solution.
Metered feed can be linked to the occupied walk-through cycle.
A removable debris screen protects the liquid zone from larger material.
The drainable stainless basin and brush cassettes support routine wash-down access.
Préoccupations du client produit
Boot hygiene may require both mechanical soil removal and a defined solution-application step, with the details set by the facility's own procedure.
A solution-only mat is quickly fouled by visible soil on boots.Rotating brushes remove loose residue before the configured solution stage.
Manual application varies in coverage and replenishment practice.A metered spray or shallow-contact module can be set up for the selected operating procedure.
Debris enters the liquid zone and obstructs service components.A removable debris screen captures larger material before routine cleaning.
Deep liquid coverage is unsuitable for some footwear and entry routes.The unit can use targeted spray or a shallow contact zone limited to the required boot area.
Les applications typiques
Food and beverage production entriesAnimal-health facility hygiene routesPharmaceutical utility areasControlled agricultural processingWet hygiene airlocks
Paramètres techniques
Brush layout, liquid-contact method and solution-management hardware are configured for the footwear, process and site procedure.
| Matériaux de base | Polypropylene brush cores and chemical-resistant fluid components in a welded SUS304 frame |
|---|---|
| Panneau épaisseur | 1.5–2.0 mm stainless steel body panels |
| Largeur effective | 450–700 mm clear passage |
| Longueur maximale | 1000–2200 mm washing and solution lane length |
| Acier face épaisseur | 1.5–2.0 mm SUS304 |
| Densité Core | 900–1100 kg/m³ for polypropylene brush cores |
| Conductivité thermique | 0.10–0.22 W/(m·K) for polymer brush components |
| surface finie | Brushed SUS304 with chemical-resistant seals and non-slip grating |
| Type joint | Welded drainable basin with removable brush modules and solution manifold |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Brush-only wash or combined wash-and-solution stagesSpray or shallow-contact solution methodSolution feed monitoring interfaceInterlocked exit-gate signal
Planning a Automatic Boot Washing and Disinfection Station specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
