Automatic boot washing and disinfection station with rotating brushes

人員 · 材料の汚染除去設備

自動ブーツ洗浄および消毒ステーション

A walk-through footwear station that brush-washes boot soles and sides, with configurable application of a compatible hygiene solution.

Rotating sole and side brushes
Configurable solution stage
Guided walk-through lane
Drainable stainless steel basin

見積もりリクエスト製品案内

商品紹介

The Automatic Boot Washing and Disinfection Station first uses rotating brushes to remove visible soil from the sole and lower boot surfaces. A separate metered stage can apply a facility-selected compatible hygiene solution by spray or controlled shallow contact, according to the operating procedure. Brush modules, a debris screen and the stainless basin remain accessible for routine cleaning and solution replacement; the final solution choice and use conditions are configured for the intended environment.

主要な特徴

Rotating sole brushes and side brushes provide mechanical washing of boot contact areas.

A configurable spray or shallow-contact stage can apply a compatible hygiene solution.

Metered feed can be linked to the occupied walk-through cycle.

A removable debris screen protects the liquid zone from larger material.

The drainable stainless basin and brush cassettes support routine wash-down access.

お客様の製品に関する懸念事項

Boot hygiene may require both mechanical soil removal and a defined solution-application step, with the details set by the facility's own procedure.

A solution-only mat is quickly fouled by visible soil on boots.Rotating brushes remove loose residue before the configured solution stage.

Manual application varies in coverage and replenishment practice.A metered spray or shallow-contact module can be set up for the selected operating procedure.

Debris enters the liquid zone and obstructs service components.A removable debris screen captures larger material before routine cleaning.

Deep liquid coverage is unsuitable for some footwear and entry routes.The unit can use targeted spray or a shallow contact zone limited to the required boot area.

典型的な用途

Food and beverage production entriesAnimal-health facility hygiene routesPharmaceutical utility areasControlled agricultural processingWet hygiene airlocks

技術的なパラメータ

Brush layout, liquid-contact method and solution-management hardware are configured for the footwear, process and site procedure.

コア材料	Polypropylene brush cores and chemical-resistant fluid components in a welded SUS304 frame
パネルの厚さ	1.5–2.0 mm stainless steel body panels
有効幅	450–700 mm clear passage
最大長さ	1000–2200 mm washing and solution lane length
鋼鉄の厚さを直面する	1.5–2.0 mm SUS304
コア密度	900–1100 kg/m³ for polypropylene brush cores
熱伝導率	0.10–0.22 W/(m·K) for polymer brush components
表面仕上げ	Brushed SUS304 with chemical-resistant seals and non-slip grating
ジョイントタイプ	Welded drainable basin with removable brush modules and solution manifold
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Brush-only wash or combined wash-and-solution stagesSpray or shallow-contact solution methodSolution feed monitoring interfaceInterlocked exit-gate signal

Planning a Automatic Boot Washing and Disinfection Station specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する