English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Персонал и оборудование для дезактивации материалов
Автоматическая станция для промывки и дезинфекции ботинков
A walk-through footwear station that brush-washes boot soles and sides, with configurable application of a compatible hygiene solution.
- Rotating sole and side brushes
- Configurable solution stage
- Guided walk-through lane
- Drainable stainless steel basin
Введение продукции
The Automatic Boot Washing and Disinfection Station first uses rotating brushes to remove visible soil from the sole and lower boot surfaces. A separate metered stage can apply a facility-selected compatible hygiene solution by spray or controlled shallow contact, according to the operating procedure. Brush modules, a debris screen and the stainless basin remain accessible for routine cleaning and solution replacement; the final solution choice and use conditions are configured for the intended environment.
Основные характеристики
A configurable spray or shallow-contact stage can apply a compatible hygiene solution.
Metered feed can be linked to the occupied walk-through cycle.
A removable debris screen protects the liquid zone from larger material.
The drainable stainless basin and brush cassettes support routine wash-down access.
Обеспокоенность клиентов продуктами
Boot hygiene may require both mechanical soil removal and a defined solution-application step, with the details set by the facility's own procedure.
A solution-only mat is quickly fouled by visible soil on boots.Rotating brushes remove loose residue before the configured solution stage.
Manual application varies in coverage and replenishment practice.A metered spray or shallow-contact module can be set up for the selected operating procedure.
Debris enters the liquid zone and obstructs service components.A removable debris screen captures larger material before routine cleaning.
Deep liquid coverage is unsuitable for some footwear and entry routes.The unit can use targeted spray or a shallow contact zone limited to the required boot area.
Типичные приложения
Food and beverage production entriesAnimal-health facility hygiene routesPharmaceutical utility areasControlled agricultural processingWet hygiene airlocks
Технические параметры
Brush layout, liquid-contact method and solution-management hardware are configured for the footwear, process and site procedure.
| Основной материал | Polypropylene brush cores and chemical-resistant fluid components in a welded SUS304 frame |
|---|---|
| Толщина панели | 1.5–2.0 mm stainless steel body panels |
| эффективная ширина | 450–700 mm clear passage |
| Максимальная длина | 1000–2200 mm washing and solution lane length |
| Толщина линий стали | 1.5–2.0 mm SUS304 |
| Плотность ядра | 900–1100 kg/m³ for polypropylene brush cores |
| Теплопроводимость | 0.10–0.22 W/(m·K) for polymer brush components |
| Поверхностная отделка | Brushed SUS304 with chemical-resistant seals and non-slip grating |
| Объединенный тип | Welded drainable basin with removable brush modules and solution manifold |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Brush-only wash or combined wash-and-solution stagesSpray or shallow-contact solution methodSolution feed monitoring interfaceInterlocked exit-gate signal
Planning a Automatic Boot Washing and Disinfection Station specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
